Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
LMS Series Laser Distance Sensor || ATEK || Made in Türkiye
Non-contact distance measurement with laser (TOF)
940 nm invisible laser (VCSEL), Class 2
2000mm mesauring range
12mm small body diamater
Analog, CANopen, MODBUS and switch output options
IP67 protection class
Precise non-contact distance measurement and approximation detection with laser beam; small and compact structure; Analog, switch, CANopen or MODBUS interface options
| Measuring Range | Output | Field of View | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 2000 mm | 4-20 mA, 0-20 mA, 0-10V, 0-5V, CANopen, RS-485, PNP Open Collector | 18° | ±%2 FS | IP67 |  |
- Non-contact distance measurement with laser (Time of Flight)
- 2000mm mesauring range
- 12mm small body diamater
- Analog, CANopen, MODBUS and switch output options
- LED status indicator
- Resistant to environmental conditions, IP67 protection class
- Long service life
- Low power consumption
| Marka |
Atek |
|---|---|
| Working Principle |
Time-of-Flight, reflected from reflector |
| Measuring Range |
0…2000mm |
| Light Type |
Invisible Laser (VCSEL), Class2 |
| Wavelength |
940 nm |
| Field Of View |
18° |
| Recommended Reflector Size |
5x5cm for distance ≤1000mm |
| Max. Permissible external light |
1000 lux (effected by intense sunlight) |
| Supply Voltage |
Analog: 12…30 Vdc |
| Output Types |
Analog : 0-10V, 0-5V, 0.5-4.5V, 0-20mA, 4-20mA |
| Power Consumption |
0,24 Watt max. |
| Current Consumption |
10mA @24VDC max |
| Sampling Rate |
Analog, CANopen, RS-485 : 20Hz |
| Minimum Resolution |
1 mm |
| Accuracy |
±%2 |
| Analog output load |
500 Ω |
| Analog output resolution |
12 Bit (1 mm resolution) |
| Indicator |
RGB LED |
| Reverse connection protection |
Yes |
| Temperature compensation |
Yes |
| Watchdog |
Yes |
| Electrical connection |
Cable or M12 connector |
| Material |
Nickel plated brass |
| Operating temperature |
-20…+85°C |
| Storage temperature |
-20…+85°C |
| Protection class |
IP67 |
- Distance measurement
- Asset control
- Motion control
- Positioning
- Obstacle detection
- Altitude monitoring
Benzer Ürünler
APS 26 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NO, optional NC switch output IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C ... +150°C | 26mm | NC or NO | IP67 | |
BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4 | IP65 or IP67 | |
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
IPS 200 Series Proximity Sensors || ATEK || Made in Türkiye
Detection of ferrous metal objects by inductive principle 17x17mm, 25x25mm and 30x30mm models Rectangular type DC 2-wire or 3-wire LED status indicator IP67 protection
Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; rectangular body; various body dimension options; long service life
| Body Dimensions (mm) | Sensing Distance | Setting Distance | Output Type | Protection | Datasheet |
|---|---|---|---|---|---|
| 17x17 25x25 30x30 | 17x17:0 … 8 mm 25x25:0 … 8 mm 30x30:0 … 15 mm | 17x17:0 … 5.6 mm 25x25:0 … 5.6 mm 30x30:0 … 11 mm | 2-wire 3-wire NPN 3-wire PNP | IP67 | |
LKR Series || ATEK || Made in Türkiye
Return spring system Measuring distance (stroke) options between 10 mm and 100 mm M10x0,75 bushing (optional others 1K, 5K and 10K resistance options ±%1 high linearity IP65 protection class
Potentiometric measurement; return spring system; small body structure; high sensitivity; long life; absolute operation, that is, not losing position information in case of power outages
Datasheet| Measuring Range | Output | Protection | Electrical Connection | Linearity | Datasheet |
|---|---|---|---|---|---|
| 10-100mm | Potenitometric | IP 65 | Cable | ±%1 | |
HSO Series Encoder Signal Conditioner and Optical Isolator
Provides optical isolation between the encoder signal and PLC, servo driver or other input devices Can change the encoder's signal voltage to match the receiver input Converts non-differential output (A, B, Z) to differential output (A, B, Z, A/, B/, Z/) Converts differential output (A, B, Z, A/, B/, Z/) to non-differential output (A, B, Z) Converts open collector output to differential or non-differential output Easy mounting on panels with DIN Rail system
Versatile interface between incremental encoder and receiving devices; Ability to convert non-differential signal to differential, differential signal to non-differential; cleaning noisy signals; adjusting the encoder signal voltage according to the receiver; DIN rail system| Isolator Output Type | Isolator Input Type | Isolator Signal Input Voltage | Output Speed | Isolator Output Voltage | Datasheet |
|---|---|---|---|---|---|
| A, B, Z, A/, B/, Z/ Quadrature | Differential line driver Non-differential line driver, non-differential open collector | 5-30VDC (TTL, RS422, Line Driver) | 1 Mhz Max | 5VDC differential line driver, 5-24VDC differential line driver | |