HSO Series Encoder Signal Conditioner and Optical Isolator
Back to products
BTT 22 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye

BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

Click to enlarge
Atek

Pressure and temperature measurement with a single sensor
Completely welded thin-film steel diaphragm structure that does not require o-ring
Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others)
-40 … +150°C temperature measurement (optional others)
4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options
G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options
High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options


Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC … +150ºC (opt. others)
Pressure: 6… 1000 bar (opt. others)		  4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb.  IP65 or IP67
  • Simultaneous pressure and temperature measurement with a single sensor
  • Completely welded thin-film steel diaphragm structure that does not require o-ring
  • Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others)
  • -40 … +150°C temperature measurement (optional others)
  • 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options
  • G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options
  • Stainless steel housing
  • EMC and reverse polarity protection
  • High accuracy and stability
Marka

Atek
TECHNICAL FEATURES

–>
Measuring Sensor

Pressure: Thin-film MEMS sensor
Temperature: PT100 (Class B EN60751)
Measuring range

Pressure: 6,10,16,25,40,100,250,400,600 and 1000 bar (Optional others)
Temperature: -40 … +150°C (Optional others)
Over Pressure

300%FS <1000Bar, 150%FS ≥1000Bar
Burst Pressure

500%FS (Max. 4000 bar)
Response time

Pressure: 25ms (standard) … nominal pressure 1ms, 5ms, 125ms (optional)
Temperature: 1sn
Accuracy

Pressure: ±0.5%FS (@0°C～70°C)
Temperature: ±0.5% FS (@0°C～70°C)
Output

2 wire 4-20mA std.
0-10V, 0.5-4.5V Ratiometric
PT100, PT1000
Besleme Voltajı

2 wire : 8-32VDC
3 wire : 12-30VDC
Current consumption

2 wire : ≤20 mA @24VDC
3 wire : <30 mA @24VDC
Reverse polarity protection

Yes
Short circuit protection

Yes
Overload protection

Yes
Electrical connection

M12 connector or cable
Process Connection

G1/4, G1/2, NPT1/4, NPT1/2, M14x1
Material

Body: 304L stainless steel
Diaphragm: 316L stainless steel
Process connection: 316L stainless steel
Operating Temp.

-10°C … +70°C
Protection

IP65 or IP67
*IP67 protection is provided if M12 connector models are equipped with press-printed connectors.
  • Industrial Machines
  • Cooling and HVAC
  • Hydraulic and Pneumatic
  • Energy Facilities
  • Automotive
  • Compressors and pumps
  • Test Benches
  • Defense and aviation
  • Rail systems

 

DATASHEET
PDF
PDF
CAD / STEP
ZIP

Benzer Ürünler

BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||

,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view

EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||

,

100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP55 protection class

EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.
Datasheet
TR
EN
Pressure Range Output Type Display Accuracy Protection Datasheet
100 milibar….200 BAR 4...20mA/HART or MODBUS RTU 2 line backlight LCD ±%0,5 or ±%0,3 F.S  IP65
Quick view

EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON

, , , ,

5 digit, 7 section high-contrast LCD display DIN 43650 4 pin polarized Plug in/out connector Compatible with transmitters with 4-20 mA output 4-20 mA 2-wire line supply Accuracy: 0.1% +/- 1 digit IP55 protection class

The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.
Datasheet
TR
EN
Display Range Input Signal Output Signal Accuracy Protection Class Datasheet
-19999 ～99999 4-20 mA 2 way switch, 1 way switch + 4-20 mA 0.1%F.S ±1 bit IP55
Quick view

MT Series Melt Temperature Sensors || ATEK ||

,

0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe

MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement


Datasheet
TR
EN
 Temperature Range Stem Structure Accuracy Probe Thread Datasheet
0 ~ 400°C Rigid or Flexible ±%0.2 FS, ±%0.5 FS M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF
Quick view

MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ||

,

Flexible body system Thermocouple (temperature sensor) 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Better than ±0.5% accuracy 4-20mA, 0-10 VDC or 3,33 mV/V output Applications with process temperature of up to 400℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body; thermocouple (temperature sensor)
Datasheet
TR
EN
Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0...35 to 0...2000 bar Flexible body with thermocouple 4-20 mA, 0-10V, 3.33mV/V 400°C  %0,5 FS
Quick view

BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

, , , ,

Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4 IP65 or IP67
Quick view