BTT 22 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Back to products
ARD 110 Radar Level Transmitter || Atek

BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

Click to enlarge
Atek

Pressure and temperature measurement with a single sensor
Completely welded thin-film steel diaphragm structure that does not require o-ring
Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others)
-40 … +150°C temperature measurement (optional others)
4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options
High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options


Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC … +150ºC (opt.others)
Pressure: 10… 2000 bar (opt.others)		 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4 IP65 or IP67
  • Simultaneous pressure and temperature measurement with a single sensor
  • Completely welded thin-film steel diaphragm structure that does not require o-ring
  • Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others)
  • -40 … +150°C temperature measurement (optional others)
  • 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options
  • Stainless steel housing
  • EMC and reverse polarity protection
  • High accuracy and stability
Marka

Atek
TECHNICAL FEATURES

–>
Measuring Sensor

Pressure: Thin-film MEMS sensor
Temperature: PT100 (Class B EN60751)
Measuring range

Pressure: Different options from 10Bar to 2000Bar (Optional others)
Temperature: -40 … +150°C (Optional others)
Over Pressure

300%FS <1000Bar, 150%FS ≥1000Bar
Burst Pressure

500%FS <1000Bar, 300%FS 1000Bar ≤basınç≤ 2000Bar
Response time

Pressure: 25ms (standard) … nominal pressure 1ms, 5ms, 125ms (optional)
Temperature: 1sn
Accuracy

Pressure: ±0.5%FS (@0°C～70°C)
Temperature: ±0.5% FS (@0°C～70°C)
Output

2 wire 4-20mA std.
0-10V, 0.5-4.5V Ratiometric
PT100, PT1000
Besleme Voltajı

2 wire : 8-32VDC
3 wire : 12-30VDC
Current consumption

2 wire : ≤20 mA @24VDC
3 wire : <30 mA @24VDC
Reverse polarity protection

Yes
Short circuit protection

Yes
Overload protection

Yes
Electrical connection

M12 connector or cable
Process Connection

G1/4
Material

Body: 304L SS
Diaphragm: 17-7PH (AISI630)
Process connection: 17-7PH SS (AISI630)
Operating Temp.

-10°C … +70°C
Protection

IP65 or IP67
*IP67 protection is provided if M12 connector models are equipped with press-printed connectors.
  • Industrial Machines
  • Cooling and HVAC
  • Hydraulic and Pneumatic
  • Energy Facilities
  • Automotive
  • Compressors and pumps
  • Test Benches
  • Defense and aviation
  • Rail systems

 

DATASHEET
PDF
PDF
CAD / STEP
ZIP

Benzer Ürünler

BLT 22 Pressure Transmitter || ATEK || Made in Türkiye

,

Piezoresistive working principle Stainless steel housing 10Bar and 16Bar models 4-20mA analog output ±0.5% F.S accuracy IP65 protection class Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
0...10bar and 0...16bar  4-20 mA IP65  ±%0,5 F.S 24mm
Quick view

BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||

,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view

BFT10-110 Differential Pressure Transmitter for Low Pressure || ATEK ||

,

0~0,0025bar…0,01bar…1bar pressure range Suitable for low pressure φ8 agnail connection, easy to install ±0.5%...±3%FS accuracy 4-20 mA analog output IP65 protection class

BFT10-110 Differential Pressure Transmitter is ideal for use at low pressures. Pressure connection is in M10 thread and agnail structure. It is widely used in the field of automatic pressure detection and control for air supply in underground ventilation and other electrical and mining industries.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0~0,0025bar…0,001bar…1bar 4-20mA IP 65 ±0.5%...±3%FS
Quick view

EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||

,

100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP55 protection class

EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.
Datasheet
TR
EN
Pressure Range Output Type Display Accuracy Protection Datasheet
100 milibar….200 BAR 4...20mA/HART or MODBUS RTU 2 line backlight LCD ±%0,5 or ±%0,3 F.S  IP65
Quick view

MT Series Melt Temperature Sensors || ATEK ||

,

0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe

MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement


Datasheet
TR
EN
 Temperature Range Stem Structure Accuracy Probe Thread Datasheet
0 ~ 400°C Rigid or Flexible ±%0.2 FS, ±%0.5 FS M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF
Quick view

PTB 110 Hydrostatic Level Sensor || ATEK || Made in Türkiye

, , ,

Special design for textile sector Piezoresistive working principle Different models between 100 mBar and 600 mBar Analog 4-20mA output ±0.3% F.S accuracy IP40 protection class

Special design for textile sector; air isolated mounting; high sensitivity; EMC and reverse polarization protected
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Datasheet
Different models from 0...100mbar to 0...600mbar  4-20 mA IP40 ±%0,3 F.S
Quick view