Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
AGS 300 Series Speed And Direction Sensors || ATEK || Made in Turkey
Hall-effect sensing technology
Integrated into the gearbox
Static measurement (zero-speed detection)
Dual pulse output (inverted)
Direction detection capability (with 2 sensors)
Different length options for compatibility with various gearbox types
IP67 protection rating
With the Hall effect technology, it detects the speed and direction of the gears and gives square wave output signal.
Datasheet
| Operating Voltage | Operating Distance | Output | Protection | Datasheet |
|---|---|---|---|---|
| 6,5…30VDC | Min:0.8mm, Max:2.5mm | Double pulse (inverted) |
IP67
|
 |
- Hall-effect sensing technology
- Integrated into the gearbox
- Static measurement (zero-speed detection)
- Dual pulse output (inverted)
- Can be sealed
- Direct connection to the vehicle electrical system
- Direction detection capability (with 2 sensors)
- Different length options for compatibility with various gearbox types
- IP67 protection rating
| Marka |
Atek |
|---|---|
| Supply Voltage |
6,5…30VDC |
| Current Consumption (max) |
5mA @6,5VDC / 11mA @24VDC / 13mA @30VDC |
| Output |
Double pulse (inverted) |
| Signal Type |
Square |
| Output Resistance |
Open collector |
| Connection |
Unearthed |
| Frequency |
0…4kHz |
| Output signal A1 |
UL ≤ 1.9 V (1 mA) |
| Output signal A2 |
inversion of A1 |
| Impulse Wheel |
Min. 2m |
| Minimum Distance |
0.8mm |
| Maximum distance |
2.5mm |
| Sensor Connection |
M18 x 1,5 thread |
| Torque (wrench size) |
max. 50 Nm (SW 27) |
| Material |
Case: AISI 304L |
| Operating temperature |
-40°C … +150°C |
| Storage Temperature |
-40°C … +150°C |
| Protection Class |
IP67 |
| Short-circuit Protection |
Yes |
| Reverse polarity Protection |
Yes |
| EMC Protection |
TS EN IEC 61326-1 |
•For tachographs / EU-type electronic tachographs KTCO 1318, FTCO 1319, and MTCO 1390 NEC
•General use in devices requiring electrical pulses (dual, inverted) for road speed and/or distance measurement
Benzer Ürünler
ERP 53 Series Multiple Rotary Potentiometer || ATEK || Made in Türkiye
60°, 90°, 345°, 350°, 355° electrical angle 6 mm shaft diameter ±0.5% linearity 1000 RPM operating speed Long life up to 10 million movements IP40 protection class
Rotary potentiometer with shaft; synchro size 20; movement life up to 10 million ; infinite and continuous rotation; 2 or 3 potentiometric outputs in one product| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| 60°, 90°, 345°, 350°, 355° |
6 mm |
52.8 mm |
Potentiometric (2 or 3 outputs) |
IP40 |
±0.5% | |
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
IPS 200 Series Proximity Sensors || ATEK || Made in Türkiye
Detection of ferrous metal objects by inductive principle 17x17mm, 25x25mm and 30x30mm models Rectangular type DC 2-wire or 3-wire LED status indicator IP67 protection
Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; rectangular body; various body dimension options; long service life
| Body Dimensions (mm) | Sensing Distance | Setting Distance | Output Type | Protection | Datasheet |
|---|---|---|---|---|---|
| 17x17 25x25 30x30 | 17x17:0 … 8 mm 25x25:0 … 8 mm 30x30:0 … 15 mm | 17x17:0 … 5.6 mm 25x25:0 … 5.6 mm 30x30:0 … 11 mm | 2-wire 3-wire NPN 3-wire PNP | IP67 | |
AJS 600 Series Joysticks, Hall-effect || ATEK || Made in Türkiye
Non contact – Hall effect measurement Dual axis CANopen or analog output Configurable button and grip options 11 bit resolution IP67 protection
Non contact hall-effect measurement technology; dual axis; CANopen or analog output; ergonomic structure; precise control; configurable button and grip options| Resolution | Axis | Angle of Movement | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 11 Bit | 2 axis (X,Y) | ±20° | CANopen or Analog | IP 67 | |
AGS 200 Series Speed And Direction Sensors || ATEK || Made in Turkey
Hall-effect measurement technology Quadrature square wave output Direction information with 90° phase shifted dual output signal Wide frequency range IP67 protection
With the Hall effect technology, it detects the speed and direction of the gears and gives Quadrature square wave output signal.| Operating Voltage | Operating Distance | Output | Protection | Datasheet |
|---|---|---|---|---|
| 8...30VDC | Model-1: Min:0mm, Typ:0.8mm, Max:1.6mm Model-2: Min:0mm, Typ:1.2mm, Max:2.4mm | NPN |
IP67 |
|
ASM20 Seismic Earthquake Sensor || ATEK || Made In Türkiye
Shaking detection in 3 axes Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings. Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored 4 dry contact relay outputs (220VDC/250VAC or 24VDC); Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC | |