BTT 22 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Thin-film steel diaphragm structure
23 mm diameter stainless steel housing
Different options up to 1000 Bar
Analog 4-20mA / 0-10V etc. outputs
±%0,5 F.S accuracy
Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design
| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 1000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 23mm |
- Completely welded thin-film steel diaphragm structure that does not require o-ring
- 23 mm diameter stainless steel housing
- Different options up to 1000 Bar
- Resistant to vibrations
- Resistant to chemicals
- 4…20mA / 0…10VDC etc. different analogue output options
- EMC and reverse polarity protection
- High accuracy and stability
- Excellent long-term operation
| Marka |
Atek |
|---|---|
| Measuring Principle |
Thin-film on steel diaphragm |
| Measuring Range |
6, 10, 16, 25, 40, 100, 250, 400, 600 and 1000 bar |
| Over Pressure |
300%FS <1000Bar, 150%FS ≥1000Bar |
| Burst Pressure |
500%FS (Max. 4000 bar) |
| Supply Voltage |
4-20 mA: 8 … 32 VDC |
| Current Consumption |
Max. 30mA |
| Output Signal |
4…20mA (2 wire), 0…20mA (3 wire) |
| Accuracy |
%0.5FS (@0°C~70°C) |
| Long Term Stability |
≤±%0.1 FS/ year |
| Response time |
25ms (standard) … nominal pressure |
| Life Time |
10^8 cycles |
| Operating Temperature - |
-40°C…+85°C |
| Material |
Pressure diaphragm – 316L SS |
| Electrical Connection |
DIN43650-A, DIN43650-C, M12, Packard or Cable |
| Process Connection |
G1/4, G1/2, NPT1/4, NPT1/2, M14x1 |
| Mounting Torque |
15 … 20 Nm |
| Protection |
IP65 or IP67 |
- Machine tools
- Hydraulics
- HVAC
- Refrigeration
- Process technology
- Water treatment
Benzer Ürünler
BTT 26 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 2000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 2000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm |
BCT 26 Pressure Transmitter || ATEK || Made in Türkiye
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
DPS 2 Series Pressure Switch With Display || ATEK ||
Pressure switch with display -1 bar...10 bar pressure range ±2% FS accuracy Analog and transistor output Multiple measuring unit option
Pressure switch with ultra-low power consumption; multiple measurement unit option; analog and open collector output; high performance LCD display| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar ... 10bar | 4-20 mA, 1-5 VDC, PNP/NPN Open Collector |
IP40 |
±2% FS |
EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||
100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP55 protection class
EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.| Pressure Range | Output Type | Display | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 100 milibar….200 BAR | 4...20mA/HART or MODBUS RTU | 2 line backlight LCD | ±%0,5 or ±%0,3 F.S | IP65 |
PTB 110 Hydrostatic Level Sensor || ATEK || Made in Türkiye
Special design for textile sector Piezoresistive working principle Different models between 100 mBar and 600 mBar Analog 4-20mA output ±0.3% F.S accuracy IP40 protection class
Special design for textile sector; air isolated mounting; high sensitivity; EMC and reverse polarization protected| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Different models from 0...100mbar to 0...600mbar | 4-20 mA | IP40 | ±%0,3 F.S |
BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors


