EPD 20 Intelligent Pressure Transmitter With LCD Display, Aluminum Alloy Case || ATEK ||
Back to products
EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON

EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||

Click to enlarge
Atek

100 milibar….200 BAR pressure range
Easy configuration with LCD module buttons
24VDC supply voltage
4…20mA/HART or MODBUS RTU output
Many measurement unit options adjustable from the menu
High accuracy up to ±%0,3 FS
IP55 protection class

EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.


Datasheet
TR
EN
Pressure Range Output Type Display Accuracy Protection Datasheet
100 milibar….200 BAR 4…20mA/HART or MODBUS RTU 2 line backlight LCD ±%0,5 or ±%0,3 F.S  IP65
  • 100 milibar….200 BAR pressure range
  • Easy configuration with LCD module buttons
  • 24VDC supply voltage
  • 4…20mA/HART or MODBUS RTU output
  • HART output model: LCD with backlight, displaying 5 bits, and 4 decimal places
  • MODBUS output model: LCD with backlight, displaying 6 bits, and 5 decimal places
  • Many measurement unit options adjustable from the menu
  • High accuracy up to ±%0,3 FS
  • Short circuit and reverse polarity protection
  • Delrin case
  • Excellent long-term work
  • IP55 protection class
Marka

Atek
GENERAL FEATURES

–>
Pressure Range

Diffrent models from 0…100mbar to 0…200Bar
Vacuum models -950mBar…0Bar
Output signal

4…20mA/HART or MODBUS RTU
Supply voltage

HART output model: 12-32VDC (suggested 24VDC)
MODBUS outpu model: 18-36VDC (suggested 24VDC)
Site operation

3 buttons, all parameters can ve modified at site
MECHANICAL AND ENVIRONMENTAL FEATURES

–>
Working and storage temperature

-30°C … +70°C
Protection class

IP65
Material

Transmitter : Stainless steel hosuing – 1.4305 (AISI303), Optional stainless 316L or Titanium
Case: Delrin® POM-C EN 10204
TRANSMITTER FEATURES

–>
Measurement Range

Diffrent models from 0…100mbar to 0…600Bar
Different vacuum models from 0… -100mbar to 0…-1Bar
Measurement Type

Ambient pressure measurement as relative
Air, Water, Oil, Non-explosive gases
Working Principle

Piezoresistive
Maximum Compressive Strength

300%F.S. ≤700mbar, 200%F.S. ＜250Bar
150%F.S ≥250Bar
*Can be 3 or 5 times
Oring – Sealing

Standard NBR, optional FKM(Viton) or EPDM
Process Connection

G1/4, G1/8, G1/2, NPT1/4, NPT1/8, NPT1/2, M14, UNF7/16X20M, UNF7/16X20F
Accuracy

±%0,5 or ±%0,3 F.S @25ᵒ C
Long Term Stability

±%0,3 T.S/ year
Response Time

1ms … nominal pressure
Mounting / Tightening Torque

15 … 20 Nm
LCD DISPLAY FEATURES

–>
Display

Modbus Output Model: LCD with backlight, displaying 6 bits, and 5 decimal places
HART Output Model:LCD with backlight, displaying 5 bits, and 4 decimal places
Units

Modbus Output Model: KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,%
HART Output Model:H2O, inHg, ftH2O, mmH2O, mmHg, psi, bar, mbar, g/cm2, kg/cm2, Pa, kPa, Torr, atm, Mpa, mH2O, mHg, m, mm, cm, %, mA, g/cm3
Sampling rate

>20 times/s
Display interface

Enlish and Chinese; pressure, temperature, current, percentage
Linearity

Better than %0,2
Stability

%0.2/year
Circuit protection

Surge current protection, reverse power protection
Isolation range

>200MΩ
Motherboard buttons operation

reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration)
LCD buttons operation

changing machine address (0-255), units, decimal place, damping time and zero clearing
  • Pneumatic Systems
  • Air compressors
  • Air Cooling-Heating Systems
  • Water Pumps
  • Liquid tanks
  • Medical industry
  • Chemical industry
DATASHEET
PDF
PDF

Benzer Ürünler

BT10-212 Flush Pressure Transmitter with Flange || ATEK ||

,

-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight

BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
-1bar…0~0.002bar…100bar 4-20mA, 4-20mA+HART IP 65 ±0.3%FS
Quick view

PCM 710 Digital Pressure Switch || ATEK ||

,

0.1 … 400 Bar pressure measurement 2-way switch quantity, NPN and PNP compatible + 4～20mA ±0.5%FS accuracy IP65 protection class OLED display Compact structure

PCM710 pressure switch is an intelligent digital product for pressure measurement and control which integrates pressure measurement, display, output and control. The product is in full electronic structure. PCM710 has advantages of flexible use, simple operation, easy commissioning and high safety and reliability.


Datasheet
TR
EN
Measuring Range Output Protection Accuracy Datasheet
～0,1 Bar…400 Bar  2- way switch, PNP and NPN compatible, 4...20mA IP 65 ±0.5%FS
Quick view

EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON

, , , ,

5 digit, 7 section high-contrast LCD display DIN 43650 4 pin polarized Plug in/out connector Compatible with transmitters with 4-20 mA output 4-20 mA 2-wire line supply Accuracy: 0.1% +/- 1 digit IP55 protection class

The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.
Datasheet
TR
EN
Display Range Input Signal Output Signal Accuracy Protection Class Datasheet
-19999 ～99999 4-20 mA 2 way switch, 1 way switch + 4-20 mA 0.1%F.S ±1 bit IP55
Quick view

MT Series Melt Temperature Sensors || ATEK ||

,

0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe

MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement


Datasheet
TR
EN
 Temperature Range Stem Structure Accuracy Probe Thread Datasheet
0 ~ 400°C Rigid or Flexible ±%0.2 FS, ±%0.5 FS M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF
Quick view

MPTS 112 Melt Pressure Sensor With Rigid Body || ATEK || Made in Türkiye

,

Rigid body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 350℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated rigid body


Datasheet
TR
EN
Measuring RangeBody StructureOutputMax. Temp.AccuracyDatasheet
0...35 to 0...2000 bar kadarRigid Body4-20 mA, 0-10V, 3.33mV/V350°C %0,5 FS
Quick view

MPT133 Plastic Melt Pressure and Temperature Sensor || ATEK || Made in Türkiye

,

Melt pressure and temperature sensor resistant to high pressures Flexible body structure 0…350 Bar or 0…750 Bar options 4-20mA, 0-10 VDC or 3.33 mV/V ratiometric output options 0.3% F.S accuracy IP65 protection class

Pressure and temperature measurement of hot fluids and liquids; precise and durable measurement with mercury; accurate temperature measurement with thermocouple; stainless steel body
Datasheet
Measuring Range Body Structure Output Protection Accuracy Datasheet
0...700 Bar (standard) or 0...300 Bar Flexible  4-20 mA, 0-10 VDC, 3,33 mV Ratiometric IP65  %0,3 F.S
Quick view