Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
DPS 2 Series Pressure Switch With Display || ATEK ||
Pressure switch with display
-1 bar…10 bar pressure range
±2% FS accuracy
Analog and transistor output
Multiple measuring unit option
Pressure switch with ultra-low power consumption; multiple measurement unit option; analog and open collector output; high performance LCD display
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar … 10bar | 4-20 mA, 1-5 VDC, PNP/NPN Open Collector |
IP40
|
±2% FS |  |
- Pressure switch with display
- -1 bar…10 bar pressure range
- ±2% FS accuracy
- Analog and transistor output
- Multiple measuring unit option
| Marka |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Measuring range |
-1bar ~10bar |
| Withstand pressure |
15bar |
| Measure accuracy |
≤±2%F.S. (ambient temperature 25°C) |
| Temperature error |
≤±3%F.S. (temperature range 0~50°C) |
| Measure pattern |
Hysterersis mode |
| Port size |
External R1/8, NPT1/8, G1/8 option, internal therad M5 |
| Display |
Double LCD display |
| Supply voltage |
12-24VDC ± |
| Transistor output |
NPN veya PNP Open Collector |
| Analog output |
1-5V or 4-20mA |
| Short-circuit protection |
Yes |
| Protection class |
IP40 |
| Ambient temperature |
Operating temperature 0~50°C, storage temperature -20~60°C |
| Insulation voltage |
1000VAC 1 min |
| Insulation resistance |
≤50MΩ(500VDC) |
| Shock |
Max 100m/s2, 3 times each in directions of X, Y and Z |
| Vibration |
Amplitude 1.5mm. 10Hz-500Hz, 2 hours each direction of X, Y and Z |
Benzer Ürünler
BTT 26 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 2000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 2000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm | |
EPD 20 Intelligent Pressure Transmitter With LCD Display, Aluminum Alloy Case || ATEK ||
100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP65 protection class
EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.| Pressure Range | Output Type | Display | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 100 milibar….200 BAR | 4...20mA/HART or MODBUS RTU | 2 line backlight LCD | ±%0,5 or ±%0,3 F.S | IP65 | |
EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON
Dro, Display and Counters, Displays For Pressure Transmitters, Pressure Measurement, Pressure Transmitters and Switches With Display, Process Control Devices
5 digit, 7 section high-contrast LCD display DIN 43650 4 pin polarized Plug in/out connector Compatible with transmitters with 4-20 mA output 4-20 mA 2-wire line supply Accuracy: 0.1% +/- 1 digit IP55 protection class
The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.| Display Range | Input Signal | Output Signal | Accuracy | Protection Class | Datasheet |
|---|---|---|---|---|---|
| -19999 ～99999 | 4-20 mA | 2 way switch, 1 way switch + 4-20 mA | 0.1%F.S ±1 bit | IP55 | |
MT Series Melt Temperature Sensors || ATEK ||
0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe
MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement
| Temperature Range | Stem Structure | Accuracy | Probe Thread | Datasheet |
|---|---|---|---|---|
| 0 ~ 400°C | Rigid or Flexible | ±%0.2 FS, ±%0.5 FS | M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF | |
MPT112 Plastic Melt Pressure and Temperature Sensor || ATEK || Made in Türkiye
Melt pressure and temperature sensor resistant to high pressures Rigid body structure 0… 350 Bar or 0… 750 Bar options 4-20mA, 0-10 VDC or 3.33 mV/V ratiometric output options 0.3% F.S accuracy IP65 protection class
Pressure and temperature measurement of hot fluids and liquids; precise and durable measurement with mercury; precise temperature measurement through thermocouple; stainless steel body| Measuring Range | Body Structure | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0...700 Bar (standard) or 0...300 Bar | Rigid | 4-20 mA, 0-10 VDC, 3,33 mV Ratiometric | IP65 | %0,3 F.S | |
BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb. | IP65 or IP67 | |