Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
HSO Series Encoder Signal Conditioner and Optical Isolator
Provides optical isolation between the encoder signal and PLC, servo driver or other input devices
Can change the encoder’s signal voltage to match the receiver input
Converts non-differential output (A, B, Z) to differential output (A, B, Z, A/, B/, Z/)
Converts differential output (A, B, Z, A/, B/, Z/) to non-differential output (A, B, Z)
Converts open collector output to differential or non-differential output
Easy mounting on panels with DIN Rail system
Versatile interface between incremental encoder and receiving devices; Ability to convert non-differential signal to differential, differential signal to non-differential; cleaning noisy signals; adjusting the encoder signal voltage according to the receiver; DIN rail system
| Isolator Output Type | Isolator Input Type | Isolator Signal Input Voltage | Output Speed | Isolator Output Voltage | Datasheet |
|---|---|---|---|---|---|
| A, B, Z, A/, B/, Z/ Quadrature | Differential line driver Non-differential line driver, non-differential open collector | 5-30VDC (TTL, RS422, Line Driver) | 1 Mhz Max | 5VDC differential line driver, 5-24VDC differential line driver |  |
- Provides optical isolation between the encoder signal and PLC, servo driver or other input devices
- Provides clearing of noisy signals
- Can change the encoder’s signal voltage to match the receiver input
- Converts non-differential output (A, B, Z) to differential output (A, B, Z, A/, B/, Z/) or
- Converts differential output (A, B, Z, A/, B/, Z/) to non-differential output (A, B, Z)
- Converts open collector output to differential or non-differential output
- Can be used as repeater for longer cable distances
- Ideal for use with encoders and servo drive encoder signal inputs and outputs
- Easy mounting on panels with DIN Rail system
| Marka |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Isolator Output Type |
A, B, Z, A/, B/, Z/ Quadrature Output |
| Isolator Input Type / Encoder Signal Output Type |
Differential line driver |
| Isolator Signal Input Voltage / Encoder Signal Output Voltage |
5-30 VDC (TTL, RS422, line driver) |
| Isolator Frequency Response |
Max 1Mhz |
| Isolator Supply Voltage |
6-24VDC |
| Isolator Supply Current |
75 mA |
| Isolator Output Voltage Options |
TTL: 5 VDC Differential Line Driver Output, Independent of supply voltage |
| Protection Level |
Reverse polarity protection |
Ideal for use with encoders and servo drive encoder signal inputs and outputs
Benzer Ürünler
APS 26 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NO, optional NC switch output IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C ... +150°C | 26mm | NC or NO | IP67 | |
BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb. | IP65 or IP67 | |
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
LK Series || ATEK || Made in Türkiye
One-sided actuating rod Measuring distance (stroke) options between 10 mm and 100 mm M10x0,75 bushing (optional others 1K, 5K and 10K resistance options ±%1 high linearity IP65 protection class
Potentiometric measurement; one-sided actuating rod; small body structure; high sensitivity; long life; absolute operation, that is, not losing position information in case of power outages| Measuring Range | Output | Protection | Electrical Connection | Linearity | Datasheet |
|---|---|---|---|---|---|
| 10-100mm | Potenitometric | IP 65 | Cable | ±%1 | |
AGS 300 Series Speed And Direction Sensors || ATEK || Made in Turkey
Hall-effect sensing technology Integrated into the gearbox Static measurement (zero-speed detection) Dual pulse output (inverted) Direction detection capability (with 2 sensors) Different length options for compatibility with various gearbox types IP67 protection rating
With the Hall effect technology, it detects the speed and direction of the gears and gives square wave output signal.
Datasheet| Operating Voltage | Operating Distance | Output | Protection | Datasheet |
|---|---|---|---|---|
| 6,5...30VDC | Min:0.8mm, Max:2.5mm | Double pulse (inverted) |
IP67 |
|
ASM20 Seismic Earthquake Sensor || ATEK || Made In Türkiye
Shaking detection in 3 axes Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings. Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored 4 dry contact relay outputs (220VDC/250VAC or 24VDC); Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC | |