Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
AJS 600 Series Joysticks, Hall-Effect || ATEK || Made in Türkiye
Non contact – Hall effect measurement
Dual axis
CANopen or analog output
Configurable button and grip options
11 bit resolution
IP67 protection
Non contact hall-effect measurement technology; dual axis; CANopen or analog output; ergonomic structure; precise control; configurable button and grip options
| Resolution | Axis | Angle of Movement | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 11 Bit | 2 axis (X,Y) | ±20° | CANopen or Analog | IP 67 |  |
- Non contact – Hall effect measurement technology
- Dual axis
- Special design for mobile machines
- Robust structure, long service life
- Configurable button and grip options
- Optional Dead man switch
- 5 million cycles mechanical life
- Resistant to electromagnetic field
- 0-10V, 0-5V, 0.5-4.5V, 0-20mA, 4-20mA or CANopen output options
- IP67 protection class
| Marka |
Atek |
|---|---|
| MECHANICAL SPECIFICATIONS |
–> |
| Angle of movement |
±20° (from center) ±1 tolerance |
| Operating Force (X, Y axis) |
6N±1N |
| Life |
5 million lifecycle |
| Material |
Shaft: Stainless steel |
| ENVIRONMENTAL SPECIFICATIONS |
–> |
| Protection Class |
IP67 |
| Operating Temperature |
-40°C…+85°C |
| Storage Temperature |
-40°C…+85°C |
| Relative Humidity |
% 10… % 90 RH |
| ELECTRICAL SPECIFICATIONS FOR ANALOG VERSION |
–> |
| Sensor Type |
Hall-effect, 2 axis |
| Resolution |
11 bit |
| Supply Voltage |
15 … 30 VDC |
| Supply Current |
≤40 mA (per axis) |
| Reverse Polarity Protection |
Yes |
| Short-Circuit Protection |
Yes |
| Overvoltage Protection |
Up to 33V |
| Electrical Interface |
4-20 mA, 0-20 mA, 0-10V, 0-5V, 0.5-4.5V |
| Return to Center Accuracy |
± % 2 |
| Load Resistance |
For current output; min 250 Ω |
| ELECTRICAL SPECIFICATIONS FOR CANOPEN VERSION |
–> |
| Sensor Type |
Hall-effect, 2 eksen |
| Resolution |
11 bit |
| Supply Voltage |
8 … 30 VDC |
| Supply Current |
≤40 mA (per axis) |
| Reverse Polarity Protection |
Yes |
| Short-Circuit Protection |
Yes |
| Overvoltage Protection |
Up to 33V |
| Protocol |
CANopen protocol: CiA DS-301 V4.02 |
| Node I |
Can be set from 1 to 127 with LSS or SDO |
| Baud Rate |
10 kBit/s, 20 kBit/s, 50 kBit/s, 100 kBit/s, 125 kBit/s, 250 kBit/s, 500 kBit/s, 800 kBit/s, 1 Mbit/s |
| PDO Veri Hızı (Data Rate) |
100 ms |
| Error Check |
Heartbeat, Emergency Message |
| PDO |
3 Tx PDO |
| PDO Modes |
Event/Time triggered, Synch/Asynch |
| SDO |
1 server |
| Position Data |
Object Dictionary 0x6020 |
| Terminating Resistor |
Optional |
- Agricultural machinery
- Construction machinery
- Crane and transport machinery
- Forestry machinery
- Mobile vehicles
Benzer Ürünler
ERP 53 Series Multiple Rotary Potentiometer || ATEK || Made in Türkiye
60°, 90°, 345°, 350°, 355° electrical angle 6 mm shaft diameter ±0.5% linearity 1000 RPM operating speed Long life up to 10 million movements IP40 protection class
Rotary potentiometer with shaft; synchro size 20; movement life up to 10 million ; infinite and continuous rotation; 2 or 3 potentiometric outputs in one product| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| 60°, 90°, 345°, 350°, 355° |
6 mm |
52.8 mm |
Potentiometric (2 or 3 outputs) |
IP40 |
±0.5% | |
BCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye
II 1G Ex ia IIC T4/T6 Ga II 1D Ex ia IIIC T120°C / T85°C Da ATEX ve IECEx Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust) Different models available from 100 mBar to 600 Bar nalog output (4-20mA / 0-10V, etc.) or CANopen output ±%0,3 F.S accuracy IP65 or IP67 protection Compact design
ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar | 4-20 mA, 0-10 VDC, Ratiometric or CANopen | IP65 or IP67 | ±%0,3 F.S | 22mm | |
APS 26 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NO, optional NC switch output IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C ... +150°C | 26mm | NC or NO | IP67 | |
BCT 24S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
- Pressure and temperature measurement with a single sensor
- Piezoresistive operating principle
- 26 mm stainless steel housing
- Pressure ranges from 60 bar to 600 bar
- Temperature measurement from -40 … +125°C
- 4-20 mA, 0-10 V, 0.5-4.5 V Ratiometric, PT100, PT1000 output options
- G1/4, G1/2, NPT1/4, NPT1/2, M14x1 mechanical connection options
- High accuracy and stability
BCT 24S series combined pressure and temperature sensors enable pressure and temperature measurement in liquid and gaseous media using a single sensor. The cooling element used in high-temperature applications protects the sensor, ensuring reliable measurement.
| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +125ºC Pressure: 60...600 Bar | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb. | IP65 or IP67 | |
IPS 200 Series Proximity Sensors || ATEK || Made in Türkiye
Detection of ferrous metal objects by inductive principle 17x17mm, 25x25mm and 30x30mm models Rectangular type DC 2-wire or 3-wire LED status indicator IP67 protection
Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; rectangular body; various body dimension options; long service life
| Body Dimensions (mm) | Sensing Distance | Setting Distance | Output Type | Protection | Datasheet |
|---|---|---|---|---|---|
| 17x17 25x25 30x30 | 17x17:0 … 8 mm 25x25:0 … 8 mm 30x30:0 … 15 mm | 17x17:0 … 5.6 mm 25x25:0 … 5.6 mm 30x30:0 … 11 mm | 2-wire 3-wire NPN 3-wire PNP | IP67 | |
ASM10 Seismic Earthquake Panel || ATEK || Made In Türkiye
Shake detection in 3 axes Keeping the last 100 earthquake events in memory and viewing them from the menu Automatic offset feature Up to 24 hours of operation with internal battery for situations such as power outages Programmable 4 dry contact relays and 12V 5A solenoid output 7 language options (Turkish, English, German, Spanish, Portuguese, Italian, Dutch)
Shake detection in 3 axes; automatically cut off gas and energy and stop the elevator in case of an earthquake; 4 programmable dry contact relays and 1 12V 5A solenoid output; Visual and audible warning in case of earthquake; 100 event log memories; up to 24 hours of operation on battery during power outages; easy installation and use with user-friendly interface| Detection Plane | Frequency Range | Output | Supply Voltage | Battery Capacity | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x 12VDC 5A solenoid 4 x dry contact relay (250V 10A) | 85-305 VAC, 47-440 Hz | 12VDC, 2.2Ah | |