Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils
Alarm delay time between 0-40 seconds can be selected at the ordering stage
40 Bar pressure resistance
Sink (NPN) or source (PNP) output type
High accuracy and stability
IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds
| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C … +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 |  |
- Suitable for mineral oils
- Alarm delay time between 0-40 seconds can be selected at the ordering stage
- 40 Bar pressure resistance
- Sink (NPN) or source (PNP) output type
- IP67 protection class
| Marka |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Supply Voltage |
9-36VDC |
| Supply Current |
<9mA |
| Max. Load current |
1A (sink), 20mA (source) |
| Alarm delay time |
Standard: 10 sn |
| Connection |
4 way Delphi Packard Metri-Pack 150 series connector |
| Power up delay |
0…10sn (factory set) |
| Power up state |
“In liquid” or “out of liquid” (factory set) |
| Short circuit protection |
Yes |
| Reverse polarity protection |
Yes |
| Overload protection |
Yes |
| Output type |
Sink (NPN) or source (PNP) |
| Output state |
Sink: normally open / normally closed (in liquid) (factory set) |
| Body |
Brass |
| Probe |
PTFE |
| Terminals |
Brass, tin plated |
| Seals |
FVMQ |
| Connector |
PA66 glass filled nylon |
| Mechanical Connection |
1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 |
| Protection |
IP67 (with mating connector fitted) |
| Max. Pressure |
40 Bar |
| Temperature Range |
Fluid: -40°C … +130°C |
Mineral oils compatible with brass, PTFE and FVMQ, typically used in motors or hydraulic actuators.
- Deck and Mobile Cranes
- Firefighting Equipment
- Forwarders
- Hydraulic Presses
- Marine Steering Units
- Power Packs
- Waste Management
- Dump and Fork Lift Trucks
- Excavators
- Harvesters
- Waste Balers
- Reach Stackers
- Wheeled Loaders
- Drilling Equipment
- Industrial Power Units
Benzer Ürünler
PTL 120 Salt Water Resistant Liquid Level Sensor || ATEK || Made in Türkiye
1.4462 (duplex), 316L or titanium body High corrosion resistance, suitable for use in salt water Different level measurements from 4 meters to 100 meters 4-20mA or 0-10 VDC analog output options, RS-485 Modbus output option ± 0.3% accuracy IP68 protection class
Standard diaphragm; submersible level transmitters; durable for harsh conditions; dublex, 316L or titanium body; high precision; EMC and reverse polarity protection; Suitable for applications such as seawater, saltwater, grey water, waste water etc.| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
|
Between 0-400 mbar and 0-25 bars
From 4 meters to 100 meters depth |
Ceramic | NBR | 4-20 mA or 0-10 VDC | IP68 | %0,3 | |
TLS Series Level Switch With Motor || ATEK ||
Maximum 0.8 bar working pressure 3 different sensitivity settings Relay output 220VAC or 24VDC powered version IP65 protection class Robust housing
The TLS 110 and TLS 210 series motor level sensors are commonly used to determine the lower and upper positions of the level in areas such as Silo, Warehouse, etc., or intermediate values if desired
| Working Pressure | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| Maximum 0.8 Bar | G1½" and G2½" | Relay(microswitch) | IP65 | |
ULS Ultrasonic Level Sensor || ATEK
Ultrasonic working principle 0.5 - 9 meters measuring distance 4-20mA, 0-10V, 0-20 mA analog output options available CANopen, RS485, RS232 serial communication options IP67 protection class Robust housing
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks, measuring range can be calibrated from the menu| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 0.5 - 9 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 30° | %0,2 FS | IP67 | |
AFT 110 Float Level Sensor || ATEK || Made in Türkiye
Various immersion length options from 75 mm to 1500 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) Various analog output options Maximum reliability thanks to high-quality reed contacts Fast and easy installation
| Immersion Length | Output Signal | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 1500mm | 4...20mA (2 wire), 0...10VDC, 0...5VDC, Ratiometrik | G1/2’’, G1”, G1-1/2’’, G2, M20x1,5 | IP65 | |
IPS 200 Series Proximity Sensors || ATEK || Made in Türkiye
Detection of ferrous metal objects by inductive principle 17x17mm, 25x25mm and 30x30mm models Rectangular type DC 2-wire or 3-wire LED status indicator IP67 protection
Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; rectangular body; various body dimension options; long service life
| Body Dimensions (mm) | Sensing Distance | Setting Distance | Output Type | Protection | Datasheet |
|---|---|---|---|---|---|
| 17x17 25x25 30x30 | 17x17:0 … 8 mm 25x25:0 … 8 mm 30x30:0 … 15 mm | 17x17:0 … 5.6 mm 25x25:0 … 5.6 mm 30x30:0 … 11 mm | 2-wire 3-wire NPN 3-wire PNP | IP67 | |
ASM20 Seismic Earthquake Sensor || ATEK || Made In Türkiye
Shaking detection in 3 axes Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings. Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored 4 dry contact relay outputs (220VDC/250VAC or 24VDC); Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC | |