SRP 36 Series Spring Return Bidirectional Rotary Potentiometer || ATEK || Made in Türkiye
Back to products
PTB 110 Hydrostatic Level Sensor || ATEK || Made in Türkiye

BCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye

Click to enlarge
Atek

II 1G Ex ia IIC T4/T6 Ga
II 1D Ex ia IIIC T120°C / T85°C Da
ATEX ve IECEx
Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust)
Different models available from 100 mBar to 600 Bar
nalog output (4-20mA / 0-10V, etc.) or CANopen output
±%0,3 F.S accuracy
IP65 or IP67 protection
Compact design

ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design


Datasheet
TR
EN
 Measuring Range Output Protection Accuracy Body Diameter Datasheet
Different models from 0…100mbar to 0…600bar  Different vacuum models from 0…-100mbar to 0…-1bar 4-20 mA, 0-10 VDC, Ratiometric or CANopen IP65 or IP67 ±%0,3 F.S  22mm
  • II 1G Ex ia IIC T4/T6 Ga
  • II 1D Ex ia IIIC T120°C / T85°C Da
  • ATEX and IECEx
  • Ex zones 0, 1, 2 (gas); 20, 21, 22 (dust)
  • Piezoresistive principle
  • Different models from 100 mBar to 600 Bar
  • Analog 4-20mA / 0-10V etc. or CANopen output
  • A wide variety of mechanical connection options
  • Excellent long-term performance
  • Small and compact design
Marka

Atek
Measuring range

Diffrent models from 0…100mbar to 0…600Bar
Different vacuum models from 0… -100mbar to 0…-1Bar
Working Principle

Piezoresistive
Maximum Pressure Strength

300%F.S. ≤700mbar, 200%F.S. <250Bar, 150%F.S ≥250Bar
*Can be 3 or 5 times.
Oring – Sealing

Standard NBR, optional FKM(Viton) or EPDM
Supply Voltage

4-20 mA: 8 … 32 VDC
0-10 V: 12 … 30 VDC
Ratiometric: 5 VDC
CANopen: 8…26 VDC
Current Consumption

30mA max.
Output Signal

4…20mA (2-wire)
0…10VDC
0.5-4.5 VDC Ratiometric, 0-5 VDC Ratiometric
CANopen
Accuracy

±%0,3 F.S @25ᵒC
Response Time

25ms (standard) … nominal pressure
1ms, 5ms, 125ms (optional)
Operating Temperature

-40°C…+85°C
Body Material

Stainless steel body – 1.4305 (AISI303)
Optional stainless 316L or Titanium
Electrical Connection

DIN43650-A, DIN43650-C or M12 connector
Protection Classı

IP65 or IP67
**If M12 plug-in models use a press-pressed plug cable
Mounting / Tightening

15 … 20 Nm
Approval / Conformity

ATEX / IECEx, according to the norm EN IEC 60079-0:2018 / EN 60079-11:2012
  • Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust)
  • Pneumatic Systems
  • Hydraulic Systems
  • Machines Equipments
  • Air Cooling – Heating Systems
  • Water Technologies
  • Automation Applications
DATASHEET
PDF
PDF
USER MANUAL
PDF
PDF
ATEX CERTIFICATE
PDF

Benzer Ürünler

PCM 710 Digital Pressure Switch || ATEK ||

,

0.1 … 400 Bar pressure measurement 2-way switch quantity, NPN and PNP compatible + 4～20mA ±0.5%FS accuracy IP65 protection class OLED display Compact structure

PCM710 pressure switch is an intelligent digital product for pressure measurement and control which integrates pressure measurement, display, output and control. The product is in full electronic structure. PCM710 has advantages of flexible use, simple operation, easy commissioning and high safety and reliability.


Datasheet
TR
EN
Measuring Range Output Protection Accuracy Datasheet
～0,1 Bar…400 Bar  2- way switch, PNP and NPN compatible, 4...20mA IP 65 ±0.5%FS
Quick view

EPD 20 Intelligent Pressure Transmitter With LCD Display, Aluminum Alloy Case || ATEK ||

,

100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP65 protection class

EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.
Datasheet
TR
EN
Pressure Range Output Type Display Accuracy Protection Datasheet
100 milibar….200 BAR 4...20mA/HART or MODBUS RTU 2 line backlight LCD ±%0,5 or ±%0,3 F.S  IP65
Quick view

EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||

,

100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP55 protection class

EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.
Datasheet
TR
EN
Pressure Range Output Type Display Accuracy Protection Datasheet
100 milibar….200 BAR 4...20mA/HART or MODBUS RTU 2 line backlight LCD ±%0,5 or ±%0,3 F.S  IP65
Quick view

MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ||

,

Flexible body system Thermocouple (temperature sensor) 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Better than ±0.5% accuracy 4-20mA, 0-10 VDC or 3,33 mV/V output Applications with process temperature of up to 400℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body; thermocouple (temperature sensor)
Datasheet
TR
EN
Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0...35 to 0...2000 bar Flexible body with thermocouple 4-20 mA, 0-10V, 3.33mV/V 400°C  %0,5 FS
Quick view

BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

, , , ,

Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others)  4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb.  IP65 or IP67
Quick view

BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

, , , ,

Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4 IP65 or IP67
Quick view