PCM 710 Digital Pressure Switch || ATEK ||
Back to products
EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||

EPD 20 Intelligent Pressure Transmitter With LCD Display, Aluminum Alloy Case || ATEK ||

Click to enlarge
Atek

100 milibar….200 BAR pressure range
Easy configuration with LCD module buttons
24VDC supply voltage
4…20mA/HART or MODBUS RTU output
Many measurement unit options adjustable from the menu
High accuracy up to ±%0,3 FS
IP65 protection class

EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.


Datasheet
TR
EN
Pressure Range Output Type Display Accuracy Protection Datasheet
100 milibar….200 BAR 4…20mA/HART or MODBUS RTU 2 line backlight LCD ±%0,5 or ±%0,3 F.S  IP65
  • 100 milibar….200 BAR pressure range
  • Easy configuration with LCD module buttons
  • 24VDC supply voltage
  • 4…20mA/HART or MODBUS RTU output
  • HART output model: LCD with backlight, displaying 5 bits, and 4 decimal places
  • MODBUS output model: LCD with backlight, displaying 6 bits, and 5 decimal places
  • Many measurement unit options adjustable from the menu
  • High accuracy up to ±%0,3 FS
  • Short circuit and reverse polarity protection
  • Aluminum alloy case
  • Excellent long-term work
  • IP65 protection class
Marka

Atek
GENERAL FEATURES

–>
Pressure Range

Diffrent models from 0…100mbar to 0…200Bar
Vacuum models -950mBar…0Bar
Output signal

4…20mA/HART or MODBUS RTU
Supply voltage

HART output model: 12-32VDC (suggested 24VDC)
MODBUS outpu model: 18-36VDC (suggested 24VDC)
Site operation

3 buttons, all parameters can ve modified at site
MECHANICAL AND ENVIRONMENTAL FEATURES

–>
Working and storage temperature

-30°C … +70°C
Protection class

IP65
Material

Transmitter : Stainless steel hosuing – 1.4305 (AISI303), Optional stainless 316L or Titanium
Case: Aluminum alloy
TRANSMITTER FEATURES

–>
Measurement Range

Diffrent models from 0…100mbar to 0…600Bar
Different vacuum models from 0… -100mbar to 0…-1Bar
Measurement Type

Ambient pressure measurement as relative
Air, Water, Oil, Non-explosive gases
Working Principle

Piezoresistive
Maximum Compressive Strength

300%F.S. ≤700mbar, 200%F.S. ＜250Bar
150%F.S ≥250Bar
*Can be 3 or 5 times
Oring – Sealing

Standard NBR, optional FKM(Viton) or EPDM
Process Connection

G1/4, G1/8, G1/2, NPT1/4, NPT1/8, NPT1/2, M14, UNF7/16X20M, UNF7/16X20F
Accuracy

±%0,5 T.S veya ±%0,3 T.S @25ᵒ C
Long Term Stability

±%0,3 T.S/ year
Response Time

1ms … nominal pressure
Mounting / Tightening Torque

15 … 20 Nm
LCD DISPLAY FEATURES

–>
Display

Modbus Output Model: LCD with backlight, displaying 6 bits, and 5 decimal places
HART Output Model:LCD with backlight, displaying 5 bits, and 4 decimal places
Units

Modbus Output Model: KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,%
HART Output Model:H2O, inHg, ftH2O, mmH2O, mmHg, psi, bar, mbar, g/cm2, kg/cm2, Pa, kPa, Torr, atm, Mpa, mH2O, mHg, m, mm, cm, %, mA, g/cm3
Sampling rate

>20 times/s
Display interface

Enlish and Chinese; pressure, temperature, current, percentage
Linearity

Better than %0,2
Stability

%0.2/year
Circuit protection

Surge current protection, reverse power protection
Isolation range

>200MΩ
Motherboard buttons operation

reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration)
LCD buttons operation

changing machine address (0-255), units, decimal place, damping time and zero clearing
  • Pneumatic Systems
  • Air compressors
  • Air Cooling-Heating Systems
  • Water Pumps
  • Liquid tanks
  • Medical industry
  • Chemical industry
DATASHEET
PDF
PDF

Benzer Ürünler

BLT 22 Pressure Transmitter || ATEK || Made in Türkiye

,

Piezoresistive working principle Stainless steel housing 10Bar and 16Bar models 4-20mA analog output ±0.5% F.S accuracy IP65 protection class Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
0...10bar and 0...16bar  4-20 mA IP65  ±%0,5 F.S 24mm
Quick view

BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||

,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view

BFT10-110 Differential Pressure Transmitter for Low Pressure || ATEK ||

,

0~0,0025bar…0,01bar…1bar pressure range Suitable for low pressure φ8 agnail connection, easy to install ±0.5%...±3%FS accuracy 4-20 mA analog output IP65 protection class

BFT10-110 Differential Pressure Transmitter is ideal for use at low pressures. Pressure connection is in M10 thread and agnail structure. It is widely used in the field of automatic pressure detection and control for air supply in underground ventilation and other electrical and mining industries.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0~0,0025bar…0,001bar…1bar 4-20mA IP 65 ±0.5%...±3%FS
Quick view

MT Series Melt Temperature Sensors || ATEK ||

,

0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe

MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement


Datasheet
TR
EN
 Temperature Range Stem Structure Accuracy Probe Thread Datasheet
0 ~ 400°C Rigid or Flexible ±%0.2 FS, ±%0.5 FS M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF
Quick view

MPTS 123 Melt Pressure Sensor With Flexible Body || ATEK ||

,

Flexible body system 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Better than ±0.5% accuracy 4-20mA, 0-10 VDC or 3,33 mV/V output Applications with process temperature of up to 400℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body
Datasheet
TR
EN
Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0...35 to 0...2000 bar Flexible Body 4-20 mA, 0-10V, 3.33mV/V 400°C  %0,5 FS
Quick view

MPT112 Plastic Melt Pressure and Temperature Sensor || ATEK || Made in Türkiye

,

Melt pressure and temperature sensor resistant to high pressures Rigid body structure 0… 350 Bar or 0… 750 Bar options 4-20mA, 0-10 VDC or 3.33 mV/V ratiometric output options 0.3% F.S accuracy IP65 protection class

Pressure and temperature measurement of hot fluids and liquids; precise and durable measurement with mercury; precise temperature measurement through thermocouple; stainless steel body
Datasheet
TR
EN
Measuring Range Body Structure Output Protection Accuracy Datasheet
0...700 Bar (standard) or 0...300 Bar Rigid 4-20 mA, 0-10 VDC, 3,33 mV Ratiometric IP65  %0,3 F.S
Quick view