Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
MPTS 123 Melt Pressure Sensor With Flexible Body || ATEK ||
Flexible body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 400℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body
| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0…35 to 0…2000 bar | Flexible Body | 4-20 mA, 0-10V, 3.33mV/V | 400°C | %0,5 FS |  |
- Flexible body system
- Better than ±0.5% accuracy
- 4 – 20mA, 0 – 10V or 3.33mV/V output
- 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
- Internal 80% shunt calibration
- Standard Inconel diaphragm
- Optional auto-zero function
- Applications with process temperature of up to 400℃
- Maximum Torque:30Nm (22lbf ft)
- Optional safe relay function
| Marka |
Atek |
|---|---|
| Pressure Range |
0~35 to 2000bar (0~500 to 0~30000psi) |
| Measurement principle |
4-arm bonded foil strain gage Wheatstone bridge |
| Supply Voltage |
4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC |
| Output Signals |
4-20 mA |
| Max. diaphragm temp. |
400°C |
| Maximum Overload Pressure Rating |
1.5 x FS(<1000bar) |
| Pressure Units |
PSI, Bar, MPa or Kg/cm² |
| Accuracy |
± % 0,5 FS |
| Repeatability |
± % 0,2 FS |
| Internal Shunt Calibration |
% 80FSO ± % 1 FSO |
| Temperature sensor |
No |
| Electrical Connection |
6PIN,7PIN, 8PIN |
| Max Torque |
30Nm |
| Process Connection |
1/2-20 UNF (45° conical seal) |
| Body |
Titanium Nitride |
| Diaphgram Material |
Inconel |
MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.
Benzer Ürünler
BCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye
II 1G Ex ia IIC T4/T6 Ga II 1D Ex ia IIIC T120°C / T85°C Da ATEX ve IECEx Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust) Different models available from 100 mBar to 600 Bar nalog output (4-20mA / 0-10V, etc.) or CANopen output ±%0,3 F.S accuracy IP65 or IP67 protection Compact design
ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar | 4-20 mA, 0-10 VDC, Ratiometric or CANopen | IP65 or IP67 | ±%0,3 F.S | 22mm | |
BCT 26 Pressure Transmitter || ATEK || Made in Türkiye
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0...100mbar to 0...600bar Different vacuum models from 0...-100mbar to 0...-1bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 or IP67 | ±%0,3 F.S | 26mm | |
BT10-212 Flush Pressure Transmitter with Flange || ATEK ||
-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight
BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar…0~0.002bar…100bar | 4-20mA, 4-20mA+HART | IP 65 | ±0.3%FS | |
PCM 710 Digital Pressure Switch || ATEK ||
0.1 … 400 Bar pressure measurement 2-way switch quantity, NPN and PNP compatible + 4～20mA ±0.5%FS accuracy IP65 protection class OLED display Compact structure
PCM710 pressure switch is an intelligent digital product for pressure measurement and control which integrates pressure measurement, display, output and control. The product is in full electronic structure. PCM710 has advantages of flexible use, simple operation, easy commissioning and high safety and reliability.
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| ～0,1 Bar…400 Bar | 2- way switch, PNP and NPN compatible, 4...20mA | IP 65 | ±0.5%FS | |
EPD 20 Intelligent Pressure Transmitter With LCD Display, Aluminum Alloy Case || ATEK ||
100 milibar….200 BAR pressure range Easy configuration with LCD module buttons 24VDC supply voltage 4...20mA/HART or MODBUS RTU output Many measurement unit options adjustable from the menu High accuracy up to ±%0,3 FS IP65 protection class
EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.| Pressure Range | Output Type | Display | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 100 milibar….200 BAR | 4...20mA/HART or MODBUS RTU | 2 line backlight LCD | ±%0,5 or ±%0,3 F.S | IP65 | |
MT Series Melt Temperature Sensors || ATEK ||
0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe
MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement
| Temperature Range | Stem Structure | Accuracy | Probe Thread | Datasheet |
|---|---|---|---|---|
| 0 ~ 400°C | Rigid or Flexible | ±%0.2 FS, ±%0.5 FS | M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF | |