MT Series Melt Temperature Sensors || ATEK ||
Back to products
MPTS 123 Melt Pressure Sensor With Flexible Body || ATEK ||

MPTS 112 Melt Pressure Sensor With Rigid Body || ATEK || Made in Türkiye

Click to enlarge
Atek

Rigid body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 350℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated rigid body


Datasheet
TR
EN
Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0…35 to 0…2000 bar kadar Rigid Body 4-20 mA, 0-10V, 3.33mV/V 350°C  %0,5 FS
  • Rigid body system
  • Better than ±0.5% accuracy
  • 4 – 20mA, 0 – 10V or 3.33mV/V output
  • 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Internal 80% shunt calibration
  • Standard Inconel diaphragm
  • Optional auto-zero function
  • Applications with process temperature of up to 350℃
  • Maximum Torque:30Nm (22lbf ft)
  • Optional safe relay function
Marka

Atek
Pressure Range

0~35 to 2000bar (0~500 to 0~30000psi)
Measurement principle

4-arm bonded foil strain gage Wheatstone bridg
Supply Voltage

4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC
3.33mV/V output models: 10VDC (recommended), 6…12 VDC
Output Signal

4-20 mA
0-10 VDC
3,33 mV/V
Max. diaphragm temp.

350°C
Maximum Overload Pressure Rating

1.5 x FS(<1000bar)
1.2 x FS(>1000bar)
Pressure Units

PSI, Bar, MPa or Kg/cm²
Accuracy

± % 0,5 FS
Repeatability

± % 0,2 FS
Internal Shunt Calibration

% 80FSO ±%1 FSO
Temperature sensor

No
Electrical Connection

6PIN,7PIN, 8PIN
Max Torque

30Nm
Process Connection

1/2-20 UNF (45° conical seal)
M14x1.5, M18x1.5, M22x1.5
Body

Titanium Nitride
Diaphgram Material

Inconel

MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.

DATASHEET
PDF
PDF

Benzer Ürünler

BCT 22 Pressure Transmitter || ATEK || Made in Türkiye

,

Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and CANopen output options ±0.5% F.S or ± 0.3% F.S accuracy IP65 or IP67 protection class Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
Different models from 0...100mbar to 0...600bar  Different vacuum models from 0...-100mbar to 0...-1bar 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric or CANopen IP65 or IP67 ±%0,5 F.S (ceramic), ±%0,3 F.S (silicon) 22mm
Quick view

BCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye

, ,

II 1G Ex ia IIC T4/T6 Ga II 1D Ex ia IIIC T120°C / T85°C Da ATEX ve IECEx Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust) Different models available from 100 mBar to 600 Bar nalog output (4-20mA / 0-10V, etc.) or CANopen output ±%0,3 F.S accuracy IP65 or IP67 protection Compact design

ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design
Datasheet
TR
EN
 Measuring Range Output Protection Accuracy Body Diameter Datasheet
Different models from 0…100mbar to 0…600bar  Different vacuum models from 0…-100mbar to 0…-1bar 4-20 mA, 0-10 VDC, Ratiometric or CANopen IP65 or IP67 ±%0,3 F.S  22mm
Quick view

BLT 22 Pressure Transmitter || ATEK || Made in Türkiye

,

Piezoresistive working principle Stainless steel housing 10Bar and 16Bar models 4-20mA analog output ±0.5% F.S accuracy IP65 protection class Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
0...10bar and 0...16bar  4-20 mA IP65  ±%0,5 F.S 24mm
Quick view

BT10-212 Flush Pressure Transmitter with Flange || ATEK ||

,

-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight

BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
-1bar…0~0.002bar…100bar 4-20mA, 4-20mA+HART IP 65 ±0.3%FS
Quick view

DPS 2 Series Pressure Switch With Display || ATEK ||

,

Pressure switch with display -1 bar...10 bar pressure range ±2% FS accuracy Analog and transistor output Multiple measuring unit option

Pressure switch with ultra-low power consumption; multiple measurement unit option; analog and open collector output; high performance LCD display
Datasheet
TR
EN
Pressure Range Output Protection Accuracy Datasheet
-1bar ... 10bar 4-20 mA, 1-5 VDC, PNP/NPN Open Collector
 IP40
 ±2% FS
Quick view

BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

, , , ,

Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4 IP65 or IP67
Quick view