MPT133 Plastic Melt Pressure and Temperature Sensor || ATEK || Made in Türkiye
Back to products
AST 10 Series Temperature Transmitter || ATEK || Made in Türkiye

MPT112 Plastic Melt Pressure and Temperature Sensor || ATEK || Made in Türkiye

Click to enlarge
Atek

Melt pressure and temperature sensor resistant to high pressures
Rigid body structure
0… 350 Bar or 0… 750 Bar options
4-20mA, 0-10 VDC or 3.33 mV/V ratiometric output options
0.3% F.S accuracy
IP65 protection class

Pressure and temperature measurement of hot fluids and liquids; precise and durable measurement with mercury; precise temperature measurement through thermocouple; stainless steel body


Datasheet
TR
EN
Measuring Range Body Structure Output Protection Accuracy Datasheet
0…700 Bar (standard) or 0…300 Bar Rigid 4-20 mA, 0-10 VDC, 3,33 mV Ratiometric IP65  %0,3 F.S
  • Robust body, durable against high temperature and pressure
  • ZERO and SPAN setting
  • Very resistant to INCONEL 718  Alloy Membran
  • Precise measurement with high stability
  • Rigid body structure
  • Insensitive to electrical noise
  • J type thermocouple (Fe-CuNi), optional E or K type thermocouple
  • TIN coated stainless steel diagram 15-5PH
  • Long life
  • IP65 protection class
Marka

Atek
Measuring Range

0…350 Bar or 0…700 Bar (standard)
(Optional 10…2000 Bar)
Supply Voltage

24 VDC (10 VDC @ 3,33 mV/V models)
Output Signals

4-20 mA
0-10 VDC
3,33 mV/V or optional 2 mV/V
Max. Temperature

900°F – 400°C
Maksimum Pressure

150 % FS
(Ex: up to 1050 bar for standard 700 bar models)
Accuracy

0,3 % FS
Repeatability

0,2 % FS
Calibration

Shunt 80 % FS
Thermocouple

J type Termocouple
Electrical Connection

6 pin socket
Connection Type

1/2 – 20 UNF Standard
(Optional M14 x 1.5, M18 x 1.5)
Body Material

Stainless steel
Membrane Material

Inconel 718 (Chromium-Nickel Mixture)
Protection Class

IP65
  •  Plastic, rubber etc. machines
DATASHEET
PDF
PDF

Benzer Ürünler

BTT 22 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye

,

Thin-film steel diaphragm structure 23 mm diameter stainless steel housing Different options up to 1000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design

Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Body Diameter Datasheet
Different options up to 1000 Bar 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric IP65 or IP67 ±%0,5 F.S 23mm
Quick view

BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||

,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view

EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON

, , , ,

5 digit, 7 section high-contrast LCD display DIN 43650 4 pin polarized Plug in/out connector Compatible with transmitters with 4-20 mA output 4-20 mA 2-wire line supply Accuracy: 0.1% +/- 1 digit IP55 protection class

The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.
Datasheet
TR
EN
Display Range Input Signal Output Signal Accuracy Protection Class Datasheet
-19999 ～99999 4-20 mA 2 way switch, 1 way switch + 4-20 mA 0.1%F.S ±1 bit IP55
Quick view

MT Series Melt Temperature Sensors || ATEK ||

,

0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe

MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement


Datasheet
TR
EN
 Temperature Range Stem Structure Accuracy Probe Thread Datasheet
0 ~ 400°C Rigid or Flexible ±%0.2 FS, ±%0.5 FS M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF
Quick view

MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ||

,

Flexible body system Thermocouple (temperature sensor) 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Better than ±0.5% accuracy 4-20mA, 0-10 VDC or 3,33 mV/V output Applications with process temperature of up to 400℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body; thermocouple (temperature sensor)
Datasheet
TR
EN
Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0...35 to 0...2000 bar Flexible body with thermocouple 4-20 mA, 0-10V, 3.33mV/V 400°C  %0,5 FS
Quick view

BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

, , , ,

Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4 IP65 or IP67
Quick view