EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON

5 digit, 7 section high-contrast LCD display
DIN 43650 4 pin polarized Plug in/out connector
Compatible with transmitters with 4-20 mA output
4-20 mA 2-wire line supply
Accuracy: 0.1% +/- 1 digit
IP55 protection class

The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.

Display Range Input Signal Output Signal Accuracy Protection Class Datasheet
-19999 ~99999 4-20 mA 2 way switch, 1 way switch + 4-20 mA 0.1%F.S ±1 bit IP55
  • 24-bit high accuracy ADC sampling, lightning protection (4KV)
  • Backlight big screen, 350° rotation angle
  • 5 digit, 7 section high contrast LCD display:-19999 to 99999
  • Suitable for 4-20 mA transmitters
  • 2 alarm / switch outputs that can be adjusted according to max and min set values
  • 4-20mA output option
  • Accuracy: 0.1% F.S. +/- 1 digit
  • More than 30 measurement units option abjustuble from menu
  • Plug in/out-DIN 43650 4 pin polarised
  • Error message for high / low range
  • IP55 protection class
  • Easy configuration with 3 buttons
  • 4-20 mA 2-wire loop power
  • Reverse polarity and lightning protection (4KV)
  • Voltage drop max. 8 V
  • Display of differential pressure in differential pressure transmitters
Marka

Atek

Applications

4-20 mA current value or percentage site display
Up to 2 indipendent switch output

Input signal

4-20 mA (2-wire)

Output Signals

1 way switch output / 2 way switch output / 1 way switch + 4…20mA output

Power supply

4-20 mA 2-wire loop power supply, max pressure drop 8VDC

Site operation

3 buttons, all parameters can ve modified at site

Display

Double row 5bit/8bit, 7 section/16 section with backlight LCD display
-19999~ 99999

Accuracy

% 0.1 F.S ±1 bit

ADC sampling

24 bit

Switch state

Normally open, normally closed for option

Switch function

High setting, low setting, window function, hysteresis function

State indicate

Red or Green LED display

Material

ABS+PC

Rotation Angle

350°

Anti-Vibration

20g, 20-5000Hz

Anti-Shock

100g, 11 ms

Electrical protection

Short Circuit protection, reverse polarity protection

Measuring Units

kPa, MPa, Pa, bar, mbar, psi, mH2O, mmH2O, Torr, atm, kg, g, mg, N, kN, °C, °F, K, %RH, %VOL, PPM, %LEL, pH, m, cm, mm, inch, m/s, Ω, kΩ, mV,V

It is used to receive 4-20mA signal from the transmitters and convert to the desired measurement unit and display it.

DATASHEET
PDF
PDF
User Manual
PDF
PDF