Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
CLS 210 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for water and water based liq
Alarm delay time between 0-40 seconds can be selected at the ordering stage
40 Bar pressure resistance
Sink (NPN) or source (PNP) output type
High accuracy and stability
IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds
| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Water and Water based liquids | 40 bar | -40°C … +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 |  |
- Suitable for water and water based liquids
- Alarm delay time between 0-40 seconds can be selected at the ordering stage
- 40 Bar pressure resistance
- Sink (NPN) or source (PNP) output type
- IP67 protection class
| Marka |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Supply Voltage |
9-36VDC |
| Supply Current |
<9mA |
| Max. Load current |
1A (sink), 20mA (source) |
| Alarm delay time |
Standard: 10 sn |
| Connection |
4 way Delphi Packard Metri-Pack 150 series connector |
| Power up delay |
0…10sn (factory set) |
| Power up state |
“In liquid” or “out of liquid” (factory set) |
| Short circuit protection |
Yes |
| Reverse polarity protection |
Yes |
| Overload protection |
Yes |
| Output type |
Sink (NPN) or source (PNP) |
| Output state |
Sink: normally open / normally closed (in liquid) (factory set) |
| Body |
Brass |
| Probe |
PTFE |
| Terminals |
Brass, tin plated |
| Seals |
FVMQ |
| Connector |
PA66 glass filled nylon |
| Mechanical Connection |
1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 |
| Protection |
IP67 (with mating connector fitted) |
| Max. Pressure |
40 Bar |
| Temperature Range |
Fluid: -40°C … +130°C |
Water based liquids, such as coolant or washer fluid, compatible with with brass, PTFE and FVMQ.
Benzer Ürünler
PTL 120 Salt Water Resistant Liquid Level Sensor || ATEK || Made in Türkiye
1.4462 (duplex), 316L or titanium body High corrosion resistance, suitable for use in salt water Different level measurements from 4 meters to 100 meters 4-20mA or 0-10 VDC analog output options ± 0.3% accuracy IP68 protection class
Standard diaphragm; submersible level transmitters; durable for harsh conditions; dublex, 316L or titanium body; high precision; EMC and reverse polarity protection; Suitable for applications such as seawater, saltwater, grey water, waste water etc.
| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
| Between 0-400 mbar and 0-25 bars From 4 meters to 100 meters depth | Ceramic | NBR | 4-20 mA or 0-10 VDC | IP68 | %0,3 | |
BTE 22 Hydrostatic Level Sensor || ATEK || Made in Türkiye
Special design for textile sector Piezoresistive working principle 316L stainless steel housing Different models between 100 mBar and 600 mBar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 protection class Compact construction
Special design for textile sector; stainless steel body; air isolated mounting; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0...100mbar to 0...600mbar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 | ±%0,3 F.S | 23mm | |
ARD 310 Radar Level Transmitter || Atek
Non-contact liquid and solid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid), ±5 mm(solid) Measuring range up to 30m Small emitting angle ±3.5° 4-20 mA+HART+RS485 output G2 connection Exproof IP67 protection
Ideal for for continuous level measurement in liquid, simple solid and open water applications. Exproof and suitable for use in explosive environments.| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Up to 30 meters (liquid and solid) | 4-20 mA+HART+RS485 | IP67 | ±2 mm (liquid) ±5 mm (solid) | |
TLS Series Level Switch With Motor || ATEK ||
Maximum 0.8 bar working pressure 3 different sensitivity settings Relay output 220VAC or 24VDC powered version IP65 protection class Robust housing
The TLS 110 and TLS 210 series motor level sensors are commonly used to determine the lower and upper positions of the level in areas such as Silo, Warehouse, etc., or intermediate values if desired
| Working Pressure | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| Maximum 0.8 Bar | G1½" and G2½" | Relay(microswitch) | IP65 | |
ULT30 Ultrasonic Level Sensor || ATEK || Made in Türkiye
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 | |
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |