BT10-214SB Flush Diaphragm Pressure Transmitter || ATEK ALFA || Made in Türkiye
- Diffusion silicone sensor, 316SUS stainless steel diaphragm
- Options from -1Bar to 160Bar
- Stainless steel body
- High accuracy and stability
- Powerful anti-interference design
- Remote transmission
- IP65 protection class
- Suitable for sanitary applications
| Pressure Range | Output | Operating Temperature | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|
| -1 Bar…160 Bar | 4-20mA, | -30~80°C | IP 65 | ±0.5%FS, ±0.25%FS |
- Diffusion silicone sensor, 316SUS stainless steel diaphragm
- Options from -1Bar to 160Bar
- Stainless steel body
- IP65 protection class
- Suitable for sanitary applications
| Marka |
Atek |
|---|---|
| Pressure range |
-1 Bar…160Bar |
| Pressure reference |
Relative Pressure, Absolute Pressure |
| Supply & output |
4~20mA (12~30VDC) |
| Accuracy |
% 0.5FS , % 0.25FS |
| Operating temp. |
-30°C … +80°C |
| Protection |
IP65 |
- Pneumatic system, hydraulic system, environmental protection and medical industry etc.
Benzer Ürünler
BCT 22 Pressure Transmitter || ATEK || Made in Türkiye
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V, CANopen and MODBUS RS485 output options ±0.5% F.S or ± 0.3% F.S accuracy IP65/IP67/IP68 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact designBCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye
II 1G Ex ia IIC T4/T6 Ga II 1D Ex ia IIIC T120°C / T85°C Da ATEX ve IECEx Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust) Different models available from 100 mBar to 600 Bar nalog output (4-20mA / 0-10V, etc.) or CANopen output ±%0,3 F.S accuracy IP65 or IP67 protection Compact design
ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact designBTT 26 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 2000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 2000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm |
EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON
5 digit, 7 section high-contrast LCD display DIN 43650 4 pin polarized Plug in/out connector Compatible with transmitters with 4-20 mA output 4-20 mA 2-wire line supply Accuracy: 0.1% +/- 1 digit IP55 protection class
The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.| Display Range | Input Signal | Output Signal | Accuracy | Protection Class | Datasheet |
|---|---|---|---|---|---|
| -19999 ~99999 | 4-20 mA | 2 way switch, 1 way switch + 4-20 mA | 0.1%F.S ±1 bit | IP55 |
MPTS 123 Melt Pressure Sensor With Flexible Body || ATEK ||
Flexible body system 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Better than ±0.5% accuracy 4-20mA, 0-10 VDC or 3,33 mV/V output Applications with process temperature of up to 400℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0...35 to 0...2000 bar | Flexible Body | 4-20 mA, 0-10V, 3.33mV/V | 400°C | %0,5 FS |
BTT 26S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors


