Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
BFT 220 Smart Differential Pressure Transmitter with LCD Display, Aluminum Alloy Housing | ATEK |
100 milibar….25 BAR pressure range
Easy configuration with LCD module buttons
24VDC supply voltage
4…20mA/HART or MODBUS RTU output
Many measurement unit options adjustable from the menu
High accuracy up to ±%0,3 FS
IP65 protection class
BFT 220 LCD display differential pressure transmitter is used to measure the pressure difference between two pressure points, convert it into the desired measurement unit, and display the measured value. Modbus and
HART output options are available. Parameter configuration and compensation adjustments can be easily performed on-site via the buttons on the LCD module.The product features high accuracy, stability and easy
operation.
| Pressure Range | Output Type | Display | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 100 milibar….25 BAR | 4…20mA/HART or MODBUS RTU | 2 line backlight LCD | ±%0,5 or ±%0,3 F.S | IP65 |  |
- 100 milibar….25 BAR pressure range
- Easy configuration with LCD module buttons
- 24VDC supply voltage
- 4…20mA/HART or MODBUS RTU output
- HART output model: LCD with backlight, displaying 5 bits, and 4 decimal places
- MODBUS output model: LCD with backlight, displaying 6 bits, and 5 decimal places
- Many measurement unit options adjustable from the menu
- High accuracy up to ±%0,3 FS
- Short circuit and reverse polarity protection
- Aluminum alloy case
- Excellent long-term work
- IP65 protection class
| Marka |
Atek |
|---|---|
| GENERAL FEATURES |
–> |
| Pressure Range |
Diffrent models from 0…100mbar to 0…25Bar |
| Output signal |
4…20mA/HART or MODBUS RTU |
| Supply voltage |
HART output model: 12-32VDC (suggested 24VDC) |
| Site operation |
3 buttons, all parameters can ve modified at site |
| MECHANICAL AND ENVIRONMENTAL FEATURES |
–> |
| Working and storage temperature |
-30°C … +70°C |
| Protection class |
IP65 |
| Material |
Transmitter : Stainless steel 304 |
| TRANSMITTER FEATURES |
–> |
| Measurement Range |
Diffrent models from 0…100mbar to 0…25Bar |
| Measurement Type |
Ambient pressure measurement as relative |
| Working Principle |
Piezoresistive |
| Process Connection |
G1/4, G1/4F, G1/2, NPT1/4, NPT1/4F, R1/4F , M12, M20 |
| Accuracy |
±%0,5 FS @25ᵒC |
| Long Term Stability |
±%0,3 T.S/ year |
| Response Time |
1ms … nominal pressure |
| Mounting / Tightening Torque |
15 … 20 Nm |
| LCD DISPLAY FEATURES |
–> |
| Display |
Modbus Output Model: LCD with backlight, displaying 6 bits, and 5 decimal places |
| Units |
Modbus Output Model: KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,% |
| Sampling rate |
>20 times/s |
| Display interface |
Enlish and Chinese; pressure, temperature, current, percentage |
| Linearity |
Better than %0,2 |
| Stability |
%0.2/year |
| Circuit protection |
Surge current protection, reverse power protection |
| Isolation range |
>200MΩ |
| Motherboard buttons operation |
reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration) |
| LCD buttons operation |
changing machine address (0-255), units, decimal place, damping time and zero clearing |
- Pneumatic Systems
- Air Compressors
- HVAC Systems (Heating, Ventilation, and Air Conditioning)
- Water Pumps
- Liquid Storage Tanks
- Medical Applications
- Chemical Industry
Benzer Ürünler
BTT 22 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Thin-film steel diaphragm structure 23 mm diameter stainless steel housing Different options up to 1000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 1000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 23mm | |
BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||
100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection
BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0...100 mBar to 0...100 Bar | 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric | IP 65 | ±0.5%FS | |
BFT10-111 Differential Pressure Transmitter With Display for Low Pressure || ATEK ||
0~0,005bar…0,01bar…1bar pressure range Suitable for low pressure Diameter 10 barb structure pressure port ±0.5%...±1%FS accuracy 4-20 mA analog output Built-in LCD display
BFT10-111 Differential Pressure Transmitter is ideal for use at low pressures. Pressure connection is in M10 thread and agnail structure. It is widely used in the field of automatic pressure detection and control for air supply in underground ventilation and other electrical and mining industries.
Datasheet| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0~0,005bar…0,001bar…1bar | 4-20mA | IP 65 | ±0.5%...±1%FS | |
MPTS 112 Melt Pressure Sensor With Rigid Body || ATEK || Made in Türkiye
Rigid body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 350℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated rigid body
| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0...35 to 0...2000 bar kadar | Rigid Body | 4-20 mA, 0-10V, 3.33mV/V | 350°C | %0,5 FS | |
MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ||
Flexible body system Thermocouple (temperature sensor) 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Better than ±0.5% accuracy 4-20mA, 0-10 VDC or 3,33 mV/V output Applications with process temperature of up to 400℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body; thermocouple (temperature sensor)| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0...35 to 0...2000 bar | Flexible body with thermocouple | 4-20 mA, 0-10V, 3.33mV/V | 400°C | %0,5 FS | |
MPT112 Plastic Melt Pressure and Temperature Sensor || ATEK || Made in Türkiye
Melt pressure and temperature sensor resistant to high pressures Rigid body structure 0… 350 Bar or 0… 750 Bar options 4-20mA, 0-10 VDC or 3.33 mV/V ratiometric output options 0.3% F.S accuracy IP65 protection class
Pressure and temperature measurement of hot fluids and liquids; precise and durable measurement with mercury; precise temperature measurement through thermocouple; stainless steel body| Measuring Range | Body Structure | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0...700 Bar (standard) or 0...300 Bar | Rigid | 4-20 mA, 0-10 VDC, 3,33 mV Ratiometric | IP65 | %0,3 F.S | |