Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
MPTS 123 Melt Pressure Sensor With Flexible Body || ATEK ||
Flexible body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 400℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body
| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0…35 to 0…2000 bar | Flexible Body | 4-20 mA, 0-10V, 3.33mV/V | 400°C | %0,5 FS |  |
- Flexible body system
- Better than ±0.5% accuracy
- 4 – 20mA, 0 – 10V or 3.33mV/V output
- 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
- Internal 80% shunt calibration
- Standard Inconel diaphragm
- Optional auto-zero function
- Applications with process temperature of up to 400℃
- Maximum Torque:30Nm (22lbf ft)
- Optional safe relay function
| Marka |
Atek |
|---|---|
| Pressure Range |
0~35 to 2000bar (0~500 to 0~30000psi) |
| Measurement principle |
4-arm bonded foil strain gage Wheatstone bridge |
| Supply Voltage |
4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC |
| Output Signals |
4-20 mA |
| Max. diaphragm temp. |
400°C |
| Maximum Overload Pressure Rating |
1.5 x FS(<1000bar) |
| Pressure Units |
PSI, Bar, MPa or Kg/cm² |
| Accuracy |
± % 0,5 FS |
| Repeatability |
± % 0,2 FS |
| Internal Shunt Calibration |
% 80FSO ± % 1 FSO |
| Temperature sensor |
No |
| Electrical Connection |
6PIN,7PIN, 8PIN |
| Max Torque |
30Nm |
| Process Connection |
1/2-20 UNF (45° conical seal) |
| Body |
Titanium Nitride |
| Diaphgram Material |
Inconel |
MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.
Benzer Ürünler
BTT 22 Thin-Film Pressure Transmitter || ATEK || Made in Türkiye
Thin-film steel diaphragm structure 23 mm diameter stainless steel housing Different options up to 1000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 1000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 23mm | |
BCT 26 Pressure Transmitter || ATEK || Made in Türkiye
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0...100mbar to 0...600bar Different vacuum models from 0...-100mbar to 0...-1bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 or IP67 | ±%0,3 F.S | 26mm | |
BLT 22 Pressure Transmitter || ATEK || Made in Türkiye
Piezoresistive working principle Stainless steel housing 10Bar and 16Bar models 4-20mA analog output ±0.5% F.S accuracy IP65 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| 0...10bar and 0...16bar | 4-20 mA | IP65 | ±%0,5 F.S | 24mm | |
BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||
100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection
BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0...100 mBar to 0...100 Bar | 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric | IP 65 | ±0.5%FS | |
DPS 2 Series Pressure Switch With Display || ATEK ||
Pressure switch with display -1 bar...10 bar pressure range ±2% FS accuracy Analog and transistor output Multiple measuring unit option
Pressure switch with ultra-low power consumption; multiple measurement unit option; analog and open collector output; high performance LCD display| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar ... 10bar | 4-20 mA, 1-5 VDC, PNP/NPN Open Collector |
IP40 |
±2% FS | |
PTB 110 Hydrostatic Level Sensor || ATEK || Made in Türkiye
Special design for textile sector Piezoresistive working principle Different models between 100 mBar and 600 mBar Analog 4-20mA output ±0.3% F.S accuracy IP40 protection class
Special design for textile sector; air isolated mounting; high sensitivity; EMC and reverse polarization protected| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Different models from 0...100mbar to 0...600mbar | 4-20 mA | IP40 | ±%0,3 F.S | |