Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
ULS Ultrasonic Level Sensor || ATEK
Ultrasonic working principle
0.5 – 9 meters measuring distance
4-20mA, 0-10V, 0-20 mA analog output options available
CANopen, RS485, RS232 serial communication options
IP65 or IP67 protection class
Robust housing
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks, measuring range can be calibrated from the menu
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 0.5 – 9 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 30° | %0,2 FS | IP65 or IP67 |  |
- Ultrasonic working principle
- 0.5 – 9 meters measuring range
- Non-contact and high precision measurement
- ±%0.2 FS accuracy
- Single line 5 digit display and 4 sealed keypads for configuration
- Display of measured value in level, distance (cm, m, inch or feet) or volume (liters, m3, imp, gallons)
- RS-232, RS-485 and CANopen serial connection options
- 4-20 mA, 0-20 mA or 0-10V analog output options
- 2 x PNP Open Collector
- IP65 (with transparent cover) or IP67 (with aluminum cover) protection class
- Economical and maintenance-free design
- Easy installation
| Marka |
Atek |
|---|---|
| Measuring Principle |
Non-contact with ultrasonic principle |
| Operating range |
0.5 – 9 meters |
| Blind area |
50 cm max. |
| Measurement Frequency |
40 kHz |
| Accuracy |
± % 0,2 FS |
| Supply Voltage |
16…30 VDC |
| Power consumption |
2,4 Watt max. |
| Current consumption |
100 mA max. @24 VDC / 150 mA max. @16 VDC |
| Sampling rate |
4 Hz |
| Ultrasonic taper angle |
35° |
| Minimum resolution |
1 mm |
| Relay outputs (Optional) |
2 x PNP Open Collector |
| Serial connection (Optional) |
RS-232, RS-485, CANopen |
| Analog outputs (Optional) |
0-10 V, 4-20 mA, 0-20 mA |
| Analog output load |
500 Ω |
| Analog output resolution |
16 Bit |
| Tare input (Optional) |
+Vcc (16…30 VDC) |
| Reverse connection protection |
Yes |
| Overload protection |
Yes (600 mA) |
| Temperature compensation |
Yes |
| Watchdog |
Yes |
| Electrical connection |
M12 / 8 pin male and M12 / 5 pin female sockets (standard) |
| Cable length |
Optional |
| Operating temperature |
-40 °C … 75 °C |
| Storage temperature |
-40 °C … 85 °C |
| Protection class |
With transparent cover: IP65 |
| Housing material |
Delrin® POM-C EN 10204 |
Benzer Ürünler
PTL 110 Liquid Level Sensor, option with chemical resistance || ATEK || Made in Türkiye
AISI 316L stainless steel body Different level measurements from 1 meter to 100 meters 4-20mA or 0-10 VDC analog output options RS-485 Modbus output option ±0.2% accuracy Oil- and fuel-resistant model option IP68 protection class Compact structure
Standard diaphragm; submersible level transmitters; durable for harsh conditions; stainless steel body; high precision; EMC and reverse polarity protection; Suitable for use with oils and fuels, wells, water tanks, lake or river level monitoring, reservoirs, wastewater, and greywater.| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
|
Between 0-100 mbar and 0-25 bars
From 1 meter to 100 meters depth |
AISI 316L | NBR or Viton (FKM) | 4-20 mA, 0-10 VDC, RS-485 Modbus | IP68 | %0,2 | |
TLS Series Level Switch With Motor || ATEK ||
Maximum 0.8 bar working pressure 3 different sensitivity settings Relay output 220VAC or 24VDC powered version IP65 protection class Robust housing
The TLS 110 and TLS 210 series motor level sensors are commonly used to determine the lower and upper positions of the level in areas such as Silo, Warehouse, etc., or intermediate values if desired
| Working Pressure | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| Maximum 0.8 Bar | G1½" and G2½" | Relay(microswitch) | IP65 | |
ULT30 Ultrasonic Level Sensor || ATEK || Made in Türkiye
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 | |
AFS 110 Float Level Sensor || ATEK || Made in Türkiye
Various immersion length options from 75 mm to 500 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) SPDT or SPST relay output Maximum reliability thanks to high-quality reed contacts Fast and easy installation
Liquid level control with float, SPDT or SPST relay output, and a wide range of options for various applications| Immersion Length | Output Type | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 500mm | SPDT or SPST relay | G1” | IP65 | |
CLS 210 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for water and water based liq Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Water and Water based liquids | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |