Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
APS 26 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents
Mechanical switch for 10mA – 5A at 9-32VDC
Vibration (5G) resistant
Designed to allow both vertical and angular movement
Standard NO, optional NC switch output
IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems
| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C … +150°C | 26mm | NC or NO | IP67 |  |
- Resistant to most oils, fuels, hydraulics, dust and solvents
- Mechanical switch for 10mA – 5A at 12-24V/li>
- Vibration (5G) resistant
- Designed to allow both vertical and angular movement
- Standard NO, optional NC switch output
- IP67 protection class
| Marka |
Atek |
|---|---|
| Temperature Range |
-40°C … +150°C |
| Body Material |
AISI304L |
| Actuation pin |
AISI 304L |
| Cable Material |
POM |
| Contact Output Type |
NO (standard), NC (optional) |
| Vibration |
5g / 100 -1000Hz |
| Actuation |
Axial or side |
| Axial Force |
At switch point : 10 – 20N |
| Mechanical Life |
1.2 million cycles |
| Operating Pressure |
1 BAR |
| Voltage Range |
12V – 24V |
| Current Range |
10mA – 5A |
| Max. Load |
135W |
| Max. Tightening |
50Nm |
| Electrical Connection |
Cable |
| Protection |
IP67 |
Mechanical switches are used in commercial vehicles, industrial equipment, conveyor systems, etc. It is used to detect last positions and give output for many different situations that may occur in systems.
Benzer Ürünler
ERP 53 Series Multiple Rotary Potentiometer || ATEK || Made in Türkiye
60°, 90°, 345°, 350°, 355° electrical angle 6 mm shaft diameter ±0.5% linearity 1000 RPM operating speed Long life up to 10 million movements IP40 protection class
Rotary potentiometer with shaft; synchro size 20; movement life up to 10 million ; infinite and continuous rotation; 2 or 3 potentiometric outputs in one product| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| 60°, 90°, 345°, 350°, 355° |
6 mm |
52.8 mm |
Potentiometric (2 or 3 outputs) |
IP40 |
±0.5% | |
BCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye
II 1G Ex ia IIC T4/T6 Ga II 1D Ex ia IIIC T120°C / T85°C Da ATEX ve IECEx Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust) Different models available from 100 mBar to 600 Bar nalog output (4-20mA / 0-10V, etc.) or CANopen output ±%0,3 F.S accuracy IP65 or IP67 protection Compact design
ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar | 4-20 mA, 0-10 VDC, Ratiometric or CANopen | IP65 or IP67 | ±%0,3 F.S | 22mm | |
LMS Series Laser Distance Sensor || ATEK || Made in Türkiye
Non-contact distance measurement with laser (TOF) 940 nm invisible laser (VCSEL), Class 2 2000mm mesauring range 12mm small body diamater Analog, CANopen, MODBUS and switch output options IP67 protection class
Precise non-contact distance measurement and approximation detection with laser beam; small and compact structure; Analog, switch, CANopen or MODBUS interface options| Measuring Range | Output | Field of View | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 2000 mm | 4-20 mA, 0-20 mA, 0-10V, 0-5V, CANopen, RS-485, PNP Open Collector | 18° | ±%2 FS | IP67 | |
BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb. | IP65 or IP67 | |
LKR Series || ATEK || Made in Türkiye
Return spring system Measuring distance (stroke) options between 10 mm and 100 mm M10x0,75 bushing (optional others 1K, 5K and 10K resistance options ±%1 high linearity IP65 protection class
Potentiometric measurement; return spring system; small body structure; high sensitivity; long life; absolute operation, that is, not losing position information in case of power outages
Datasheet| Measuring Range | Output | Protection | Electrical Connection | Linearity | Datasheet |
|---|---|---|---|---|---|
| 10-100mm | Potenitometric | IP 65 | Cable | ±%1 | |
ASM20 Seismic Earthquake Sensor || ATEK || Made In Türkiye
Shaking detection in 3 axes Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings. Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored 4 dry contact relay outputs (220VDC/250VAC or 24VDC); Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC | |