Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
CLS 210 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for water and water based liq
Alarm delay time between 0-40 seconds can be selected at the ordering stage
40 Bar pressure resistance
Sink (NPN) or source (PNP) output type
High accuracy and stability
IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds
| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Conductive and non-conductive liquids | 40 bar | -40°C … +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 |  |
- Suitable for water and water based liquids
- Alarm delay time between 0-40 seconds can be selected at the ordering stage
- 40 Bar pressure resistance
- Sink (NPN) or source (PNP) output type
- IP67 protection class
| Marka |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Supply Voltage |
9-36VDC |
| Supply Current |
<9mA |
| Max. Load current |
1A (sink), 20mA (source) |
| Alarm delay time |
Standard: 10 sn |
| Connection |
4 way Delphi Packard Metri-Pack 150 series connector |
| Power up delay |
0…10sn (factory set) |
| Power up state |
“In liquid” or “out of liquid” (factory set) |
| Short circuit protection |
Yes |
| Reverse polarity protection |
Yes |
| Overload protection |
Yes |
| Output type |
Sink (NPN) or source (PNP) |
| Output state |
Sink: normally open / normally closed (in liquid) (factory set) |
| Body |
Brass |
| Probe |
PTFE |
| Terminals |
Brass, tin plated |
| Seals |
FVMQ |
| Connector |
PA66 glass filled nylon |
| Mechanical Connection |
1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 |
| Protection |
IP67 (with mating connector fitted) |
| Max. Pressure |
40 Bar |
| Temperature Range |
Fluid: -40°C … +130°C |
Water based liquids, such as coolant or washer fluid, compatible with with brass, PTFE and FVMQ.
Benzer Ürünler
PTL 190 Liquid Level Sensor With Slim Body || ATEK || Made in Türkiye
AISI 316L stainless steel 19 mm slim body Different level measurements from 1 meter to 100 meters 4-20mA or 0-10 VDC analog output options, RS-485 Modbus output option ±0.3% accuracy IP68 protection class Compact structure
Submersible level transmitter with 19 mm slim body; durable for harsh conditions; 316L stainless steel body; high precision; EMC and reverse polarity protection; Suitable for general applications such as lake or river level, wells, water tanks etc.| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
|
Between 0-100 mbar and 0-25 bars
From 1 meter to 100 meters depth |
AISI 316L | Viton (FKM) | 4-20 mA or 0-10 VDC | IP68 | %0,3 | |
PTL 130 Chemical Resistant Liquid Level Sensor || ATEK || Made in Türkiye
AISI 316L stainless steel body Different level measurements from 1 meters to 100 meters 4-20mA, 0-10 VDC or 0.5-4.5 VDC analog output options Suitable for oils and fuels ±%0,3 accuracy IP68 protection class Compact structure
Standard diaphragm; submersible level transmitters; durable for harsh conditions; 316L stainless steel body; high precision; EMC and reverse polarity protection, Suitable for applications such as oils and fuels| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
|
Between 0-100 mbar and 0-25 bars
From 1 meter to 100 meters depth |
AISI 316L | Viton (FKM) | 4-20 mA, 0-10 VDC, 0.5-4.5 VDC | IP68 | %0,3 | |
BTE 22 Hydrostatic Level Sensor || ATEK || Made in Türkiye
Special design for textile sector Piezoresistive working principle 316L stainless steel housing Different models between 100 mBar and 600 mBar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 protection class Compact construction
Special design for textile sector; stainless steel body; air isolated mounting; high sensitivity; EMC and reverse polarization protected; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0...100mbar to 0...600mbar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 | ±%0,3 F.S | 23mm | |
ARD 210 Radar Level Transmitter || Atek
Non-contact liquid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid) Measuring range up to 30m Easy Setup via Bluetooth Small emitting angle ±3.5° 4-20 mA+HART+RS485 output G1,5 connection IP67 protection
Ideal for non-contact liquid level measurement in simple applications. It is especially suitable for open channel applications. It can also be used in some liquid tanks and containers. With Bluetooth feature, it allows level reading and adjustment without approaching the tank or hazardous area.| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Up to 30 meters (liquid) | 4-20 mA+HART+RS485 | IP67 | ±2 mm | |
ULT30 Ultrasonic Level Sensor || ATEK || Made in Türkiye
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 | |
CLS 410 Capacitive Level Sensor || ATEK || Made in Türkiye
Developed by ATEK Sensor engineers, this system features capacitive measurement technology and operates on the principle of precisely detecting changes in capacitance between the measuring probe and the tank wall or reference electrode.
| Application | Max Pressure | Temperature Range | Output Signal | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Conductive and non-conductive liquids | 40 bar | Non-Cooled Model: -40...+85°C, Cooled Model: -40...+150°C | 4-20mA (3 Telli), 0-10VDC, 0.5-4.5VDC, 0-5VDC, RS485, CANopen | M16, G1/2’’, G1’’, G1-1/2’’ | IP67 | |