CLS 410 Capacitive Level Sensor || ATEK || Made in Türkiye
Developed by ATEK Sensor engineers, this system features capacitive measurement technology and operates on the principle of precisely detecting changes in capacitance between the measuring probe and the tank wall or reference electrode.
- Capacitive Measurement Principle
- 4-20 mA (3-Wire), 0-10 V, 0.5-4.5 V, 0-5 V, RS485, CANopen, Sink (NPN) and Source (PNP) Output Options
- M16, G1/2″, G1″, and G1-1/2″ Process Connection Options
- High Accuracy and Stability
- IP67 Protection Rating
| Marka |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Supply Voltage |
12…24VDC —> 4-20mA (3 Telli),0.5-4.5VDC, 0-5VDC, RS485, CANopen |
| Max. Load current |
1A (sink), 100mA (source) |
| Connection |
M12/4 pin |
| Short circuit protection |
Yes |
| Reverse polarity protection |
Yes |
| Overload protection |
Yes |
| Output type |
Sink (NPN) or source (PNP) |
| Output state |
Sink: normally open / normally closed |
| Body |
AISI 316L |
| Probe |
FEP |
| Mechanical Connection |
M16, G1/2’’, G1’’ ve G1-1/2’’ |
| Protection |
IP67 (with mating connector fitted) |
| Temperature Range |
Non-cooled model: -40°C … +85°C |
- Liquid Tanks
- Glycol Tanks
- Food Processing Machinery
- Coolant Tanks
- Clean Water Reservoirs
- Oil Tanks
- High-Temperature Tanks
- Low-Conductivity Liquids
- Grain Silos
- Cement Silos
- Sand Storage Applications
- Hot Adhesives and High-Viscosity Acids and Chemical Liquids
Benzer Ürünler
PTL 120 Salt Water Resistant Liquid Level Sensor || ATEK || Made in Türkiye
1.4462 (duplex), 316L or titanium body High corrosion resistance, suitable for use in salt water Different level measurements from 4 meters to 100 meters 4-20mA or 0-10 VDC analog output options, RS-485 Modbus output option ± 0.3% accuracy IP68 protection class
Standard diaphragm; submersible level transmitters; durable for harsh conditions; dublex, 316L or titanium body; high precision; EMC and reverse polarity protection; Suitable for applications such as seawater, saltwater, grey water, waste water etc.| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
|
Between 0-400 mbar and 0-25 bars
From 4 meters to 100 meters depth |
Ceramic | NBR | 4-20 mA or 0-10 VDC | IP68 | %0,3 |
MSS Series Rotary Paddle Level Switch || ATEK ||
0.5~1.0KG-cm torque 1 RPM speed SPDT switch output 220VAC or 24VDC supply IP65 protection class Pedal type options
MSS series rotary paddle switches are used for level control in silos and tanks where materials with solid particles are stored. Full and empty signals can be received by performing level control in many demanding applications with different pedal varieties in a safe manner. They can be connected horizontally and vertically.| Torque | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| 0.5~1.0KG-cm | 1-1/2” PT | SPDT Switch | IP65 |
ARD 110 Radar Level Transmitter || Atek
Non-contact liquid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid) Measuring range up to 30m Easy Setup via Bluetooth Small emitting angle ±3.5° 4-20mA + RS485 output G1,5 connection IP67 protection
Ideal for non-contact liquid level measurement in simple applications. It is especially suitable for open channel applications. It can also be used in some liquid tanks and containers. With Bluetooth feature, it allows level reading and adjustment without approaching the tank or hazardous area.| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Up to 30 meters (liquid) | 4-20 mA + RS485 | IP67 | ±2 mm |
AFS 110 Float Level Sensor || ATEK || Made in Türkiye
Various immersion length options from 75 mm to 1000 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) DOUBLE (SPDT) or SINGLE (SPST) relay output Maximum reliability thanks to high-quality reed contacts Fast and easy installation
Liquid level control with float, DOUBLE (SPDT) or SINGLE (SPST) relay output, and a wide range of options for various applications| Immersion Length | Output Type | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 1000mm | DOUBLE (SPDT) or SINGLE (SPST) relay | G1” | IP65 |
AFT 110 Float Level Sensor || ATEK || Made in Türkiye
Various immersion length options from 75 mm to 1500 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) Various analog output options Maximum reliability thanks to high-quality reed contacts Fast and easy installation
| Immersion Length | Output Signal | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 1500mm | 4...20mA (2 wire), 0...10VDC, 0...5VDC, Ratiometrik | G1/2’’, G1”, G1-1/2’’, G2, M20x1,5 | IP65 |
CLS 210 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for water and water based liq Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds
Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors


