Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
SAS 50 Series Programmable Singleturn Absolute Rotary Encoder || ATEK || Made in Türkiye
Absolute measurement with magnetic principle
50 mm body diameter
Parallel, CANopen or analog output
6 mm or 8 mm shaft diameter
14 bit angular resolution
3000 RPM operating speed
IP67 protection class
Absolute measurement with magnetic principle; 50 mm body diameter; analog, canopen or parallel output; compact design
| Resolution | Shaft Diameter | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 14 Bit | 6 or 8 mm | 50 mm | Parallel, Analog or CANopen | IP 67 |  |
- Absolute measurement with magnetic principle
- 50 mm body diameter
- 6 mm or 8 mm shaft diameter
- 14 bit angular resolution
- Analog or CANopen output options
- Redundant output
- Analogue output signal forms can be selected according to 3 selected points
- High sensitivity
- IP67 Protection class
| Marka |
Atek |
|---|---|
| ELECTRICAL SPECIFICATIONS FOR ANALOG VERSION |
-> |
| Working Principle |
4-20 mA, 0-10 V, 0.5- 4.5 V, 0-5 V, 20-4 mA, 10-0 V, 4.5-0.5 V, 5-0 V |
| ELECTRICAL SPECIFICATIONS FOR CANOPEN VERSION |
-> |
| Supply Voltage |
12 … 30 VDC |
| Accuracy |
±0,1° |
| Repeatability |
0,1° |
| Angular Resolution |
14 Bit |
| Response Frequency |
333 Hz |
| Communication Profile |
CiA 301 |
| Device Type |
CANopen, CiA DS406 |
| Node ID |
Between 1 and 127, configurable via LSS or SDO |
| Baud Rate |
10 kBit/s, 20 kBit/s, 50 kBit/s, 100 kBit/s, 125 kBit/s, 250 kBit/s, 500 kBit/s, 800 kBit/s, 1 Mbit/s |
| PDO Data Rate |
100 ms |
| PDO Modes |
Event/Time triggered, Synch/Asynch |
| SDO |
1 server |
| Position data |
Object Dictionary 0x6020 |
| Terminating Resistor |
Optional |
| ELECTRICAL SPECIFICATIONS FOR PARALLEL VERSION |
-> |
| Working Principle |
Hall Effect |
| Supply Voltage |
5 … 30 VDC |
| Current Consumption |
≤60 mA |
| Protection |
Reverse & over voltage |
| Accuracy |
±0,1° |
| Resolution (per turn) |
14 Bit |
| Response Frequency |
333 Hz |
| Inputs |
Preset (Zero Setting) |
| Output Signals |
Push-Pull, PNP Open Collector, NPN Open Collector |
| Output Logic |
Positive Logic (Active High) or Negative Logic (Active Low) |
| Output Capacity |
20 mA/kanal |
| Electrical Connection |
18 x 0,22 mm2shielded cable |
| MECHANICAL SPECIFICATIONS |
-> |
| Maximum Speed |
3000 RPM |
| Body Diameter |
50 mm |
| Shaft Diameter |
6 mm, 8 mm |
| Protection Class |
IP67 |
| Operating Temperature |
-20 … +70 °C |
| Relative Humidity |
% 10 … % 90 |
| Material |
Shaft: Stainless Steel |
Benzer Ürünler
RB Series Magnetic Ring || ATEK || Made in Türkiye
Suitable for MLS 110/120/130/210 series Different resolution options up to 36000 pulses with Atek MLS series reader sensors Magnetic non-contact incremental measurement 1mm, 2mm or 5mm pitch Hollow shaft up to 54mm IP67 protection
Incremental magnetic ring made of sintered hard ferrite material suitable for use with magnetic reader sensors MLS 110/120/130/210 series
| Number Of Pole | Pitch | Material | Accuracy | Datasheet |
|---|---|---|---|---|
| 36, 46, 50, 64, 72, 100 or 128 | 1 / 2 / 5 mm | Sintered hard ferrite | 0.1° / 0.01° (depending on ring diameter) | |
ERP 13 Series Rotary Potentiometer || ATEK || Made in Türkiye
300°±5° electrical angle 13 mm ultra small body, 3 mm shaft ±2% linearity Servo flange mounting Optional rear shaft and center tap IP40 protection class
Rotary miniature potentiometer with shaft; servo flange mounting; movement life up to 10 million ; infinite and continuous rotation; optional rear shaft and center tap output| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| 300° |
3 mm |
13 mm |
Potentiometric |
IP40 |
±2% | |
MTLP Series Multiturn Potentiometer || ATEK || Made in Türkiye
10, 25 or 50 turns option 6 mm shaft diameter Potentiometric output High linearity Long service life up to 10 million turns IP40 protection
Measurement of rotary movements with screw pitch potentiometric calculation on linear axis; very long life; precise and accurate measurement
| Number Of Turns | Shaft Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|
| 10, 25 or 50 turns | 6 mm | Poteniometric | IP40 | ±%1.5, ±%0.5, ±%0.4 | |
ARS B 37 End Hollow Shaft || ATEK || Made in Türkiye
Incremental measurement with magnetic principle 37 mm body diameter 4, 5 or 6 mm end hollow shaft options Resolution options from 1 to 1024 pulses Durable up to 3000 RPM IP54 protection class
Extremely resistant to harsh environmental conditions with magnetic mesauring principle; incremental precision measurement; 37 mm body diameter; different end hollow shaft options| Resolution | Shaft Diameter | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| Different options from 1 to 1024 pulses | 4, 5 or 6 mm | 37 mm |
Push-Pull, TTL Line Driver, Open Collector |
IP 54 | |
ARC S 58 Shaft || ATEK || Made in Türkiye
Incremental measurement with optical principle 58 mm body diameter 6, 8, 10, 12 or 14 mm shaft options Resolution options from 60 to 20000 pulses Durable up to 6000 RPM IP54 protection class
Incremental and extremely high precision measurement with optical measuring principle; 58 mm body diameter; shaft design; different flange options
| Resolution | Shaft Diameter | Body Diameter | Flange Type | Output | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Different options from 60 to 20000 pulses | 6, 8, 10, 12 or 14 mm | 58 mm | Clamping, Synchro, Tacho and Square | Push-Pull, TTL Line Driver, Open Collector | IP 54 | |
ARS S 58 Shaft, SSI Output || ATEK || Made in Türkiye
Absolute measurement with magnetic principle 58 mm body diameter 6, 8,10, 12 or 14 mm shaft options 12 bit angular resolution SSI interface Durable up to 3000 RPM IP54 protection class
Extremely resistant to harsh environmental conditions with magnetic mesauring principle; absolute precision measurement; 58 mm body diameter; different shaft options
| Resolution | Shaft Diameter | Body Diameter | Flange Type | Output | Protection | Datasheet |
|---|---|---|---|---|---|---|
| 12 bit | 6, 8, 10, 12 or 14 mm | 58 mm | Clamping, Synchro, Tacho and Square | SSI 13 bit (12 bit data + 1 stop bit)" | IP 54 | |