AGS 10 Series Gear Motion Sensor || ATEK || Made in Türkiye

Hall effect technology
5V or 10V push-pull output
LED status indicator
Reverse polarity and short-circuit protection

With the Hall effect technology, it detects the movement in the gears and gives a push-pull output signal.

Operating Voltage Operating Distance Output Datasheet
8…33VDC 4,2 mm max.
5V or 10V Push-Pull
  • Hall effect technology
  • 5V or 10V push-pull output
  • LED status indicator
  • Reverse polarity and short-circuit protection
Marka

Atek

TECHNICAL FEATURES

–>

Operating Voltage

8…33VDC

Current Consumption

10 mA (w/o load)

Output Type

5V push-pull or 10V push-pull

Output high level (VoutHigh)

3,5V < VoutH < 5,5V (5V push-pull)
8,5V < VoutH < 10.5V (10V push-pull)

Output low level (VoutLow)

0V < VoutL <0,7V

Output Current (nominal)

±4mA (short circuit with GND or Vcc) (5V push-pull)
±9,5mA (short circuit with GND or Vcc) (10V push-pull)

Thold

2,2 sn ± % 10

Output switching characteristic

Hız=0: Vout=VoutH
Hız>0: Vout=VoutL (On motion, LED lights up for he duration of thold)

Load capacity

≤5nF

Operating distance

4,2 mm max.

Reverse polarity protection

Yes

Output short circuit protection

Yes

Operating temperature

-35°C…+85°C

Electrical Connection

3 x 0.14 mm2 shielded cable and Superseal 4 pin connector

DATASHEET
PDF
PDF