INC 210 Single Axis Angle / Tilt Sensor / Inclinometer || ATEK || Made in Türkiye
Back to products
BCT 26 Pressure Transmitter || ATEK || Made in Türkiye

BCT 22 Pressure Transmitter || ATEK || Made in Türkiye

Click to enlarge
Atek

Piezoresistive working principle
Stainless steel housing (1.4305)
Optional 316L or titanium housing
Different models between 100 mBar and 600 Bar
Analog 4-20mA / 0-10V and CANopen output options
±0.5% F.S or ± 0.3% F.S accuracy
IP65 or IP67 protection class
Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design


Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
Different models from 0…100mbar to 0…600bar  Different vacuum models from 0…-100mbar to 0…-1bar 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric or CANopen IP65 or IP67 ±%0,5 F.S (ceramic), ±%0,3 F.S (silicon) 22mm
  • Piezoresistive working principle
  • Small body size of 22 mm
  • Long-term excellent operation
  • Stainless steel body
  • Small and compact design
  • EMC and reverse polarity protection
  • Analog 4-20mA / 0-10V and so on different outputs
  • CANopen output
  • Different models between 100 mBar and 600 Bar
Marka

Atek
Measuring range

Diffrent models from 0…100mbar to 0…600Bar r
Different vacuum models from 0… -100mbar to 0…-1Bar
Working Principle

Piezoresistive
Maximum Pressure Strength

300%F.S. ≤700mbar, 200%F.S. <250Bar, 150%F.S ≥250Bar
*Can be 3 or 5 times.
Oring – Sealing

Standard NBR, optional FKM(Viton) or EPDM
Supply Voltage

4-20 mA: 8 … 32 VDC
0-20 mA: 12 … 30 VDC
0-10 V: 12 … 30 VDC
Ratiometric: 5 VDC
CANopen: 8…26 VDC
Current Consumption

30mA max.
Output Signal

4…20mA (2-wire), 0…20mA (3-wire)
0…10VDC, 1…6VDC , 0…5VDC , Ratiometric
CANopen
Accuracy

±%0,5 F.S @25ᵒC
±%0,3 F.S @25ᵒC
Response Time

25ms (standard) … nominal pressure
1ms, 5ms, 125ms (optional)
Operating Temperature

-40°C…+85°C
Body Material

Stainless steel body – 1.4305 (AISI303)
Optional stainless 316L or Titanium
Electrical Connection

Socker models DIN43650-A , DIN46350-C , M12 , Packard or
PVC cable 3 x 0.14mm2
Protection Classı

IP65 or IP67
**If M12 plug-in models use a press-pressed plug cable
Mounting / Tightening

15 … 20 Nm
  • Pneumatic Systems
  • Air compressors
  • Air Cooling-Heating Systems
  • Water Pumps
  • Liquid tanks
  • Medical industry
  • Chemical industry
DATASHEET
PDF
PDF
CAD / STEP
ZIP
CAN EDS
ZIP

Benzer Ürünler

EPT 22 Pressure Transmitter || ATEK || Made in Türkiye

,

Piezoresistive measuring principle Stainless steel housing (303) 10 Bar, 16 Bar, 0… -1 Bar, -1… 0 Bar Different options 4-20mA, 0-10 VDC or ratiometric output options ±1% F.S sensitivity IP65 protection class Compact construction

For air or non-corrosive gas applications
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Datasheet
10 Bar, 16 Bar , 0...-1 Bar, -1...0 Bar 4-20 mA, 0-10 VDC, Ratiometric IP65  ±%1 F.S
Quick view

BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||

,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view

BT10-212 Flush Pressure Transmitter with Flange || ATEK ||

,

-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight

BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
-1bar…0~0.002bar…100bar 4-20mA, 4-20mA+HART IP 65 ±0.3%FS
Quick view

BFT10-110 Differential Pressure Transmitter for Low Pressure || ATEK ||

,

0~0,0025bar…0,01bar…1bar pressure range Suitable for low pressure φ8 agnail connection, easy to install ±0.5%...±3%FS accuracy 4-20 mA analog output IP65 protection class

BFT10-110 Differential Pressure Transmitter is ideal for use at low pressures. Pressure connection is in M10 thread and agnail structure. It is widely used in the field of automatic pressure detection and control for air supply in underground ventilation and other electrical and mining industries.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0~0,0025bar…0,001bar…1bar 4-20mA IP 65 ±0.5%...±3%FS
Quick view

MT Series Melt Temperature Sensors || ATEK ||

,

0 ~ 400°C temperature range 0 ~ 30mm probe length ±%0.2 FSO, ±%0.5 FSO accuracy E / J / K thermocouple or PT100 M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF probe thread Conical or dimond probe

MT series melt temperature sensors have been especially developed for melt and core temperature detection in extrusion process with the ability of quick response time, perfect stability and accurate measurement


Datasheet
TR
EN
 Temperature Range Stem Structure Accuracy Probe Thread Datasheet
0 ~ 400°C Rigid or Flexible ±%0.2 FS, ±%0.5 FS M10x1.0, M12x1.5, M14x1.5, M18x1.5, 1/2“- 20 UNF
Quick view

BTT 22S Combined Pressure and Temperature Transmitter || ATEK || Made in Türkiye

, , , ,

Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability

Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options
Datasheet
TR
EN
Measuring Range Output Mechanical Connection Protection Datasheet
Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others)  4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb.  IP65 or IP67
Quick view