Linear Measurement
Rotary Measurement
Pressure Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Mechanical Plunger Switches
Seismic / Earthquake Sensors
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
APS 27 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents
Mechanical switch for 10mA – 5A at 9-32VDC
Vibration (5G) resistant
Designed to allow both vertical and angular movement
Standard NC, optional NO switch output
Industry standard AMP superseal connector
IP69K protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems
| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C … +150°C | 27mm | NC or NO | IP69K |  |
- Resistant to most oils, fuels, hydraulics, dust and solvents
- Mechanical switch for 10mA – 5A at 12-24V/li>
- Vibration (5G) resistant
- Designed to allow both vertical and angular movement
- Standard NC, optional NO switch output
- Industry standard AMP superseal connector
- IP69K protection class
| Marka |
Atek |
|---|---|
| Temperature Range |
-40°C … +150°C |
| Body Material |
11SMn30Pb (Plating:ZN-Ni) |
| Actuation pin |
AISI 304L |
| Cable Material |
POM |
| Contact Output Type |
NC (standard), NO (optional) |
| Vibration |
5g / 100 -1000Hz |
| Actuation |
Axial or side |
| Axial Force |
At switch point : 10 – 20N |
| Mechanical Life |
1.2 million cycles |
| Operating Pressure |
1 BAR |
| Voltage Range |
12V – 24V |
| Current Range |
10mA – 5A |
| Max. Load |
135W |
| Max. Tightening |
50Nm |
| Electrical Connection |
AMP 282080-1 connector |
| Protection |
IP69K |
Mechanical switches are used in commercial vehicles, industrial equipment, conveyor systems, etc. It is used to detect last positions and give output for many different situations that may occur in systems.
Benzer Ürünler
APS 26 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NO, optional NC switch output IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C ... +150°C | 26mm | NC or NO | IP67 | |